rapido
Regular Member
- Joined
- Feb 13, 2005
- Messages
- 50
- Reaction score
- 0
- Points
- 0
- Age
- 42
- My Satellite Setup
- 60cm
- My Location
- Hertfordshire
Hiya,
There was a slight change of plans since this post: http://www.satellites.co.uk/php-bin/forum/showthread.php?t=36727
My father is no longer interested in his system, so I brought the box and a small dish to my flat on the coast, and as my flat is on the west side of the building, I can only really get Hispasat.
I tried patching my Comag (to get TV Cabo in Nagra 1), but without much success, so I'm scrapping that idea. I've now decided to get a CAM. But of course, I only want the cheapest one that can just do Nagravision 1, because... that's... all... I... need.
A Dragon is out of the question because it's too expensive, and I've heard there are problems using it with a Comag anyway.
Preferably, I'm looking for a CAM that's ready to go (no mucking about with interfaces and programming, I'm no good with all that), and after some research I've found that TV Cabo may be autoupdating in some CAMs!
So the basic question is: is there a CAM out there that is cheap, decodes Nagra 1 (either autoupdating, or remote updating), and doesn't need loader cards and stuff?
-rapido
PS I've heard mainly about the Matrix Revolutions 2.21 - would that be any good? £40 is quite a lot for me, but if its my only choice :-(
There was a slight change of plans since this post: http://www.satellites.co.uk/php-bin/forum/showthread.php?t=36727
My father is no longer interested in his system, so I brought the box and a small dish to my flat on the coast, and as my flat is on the west side of the building, I can only really get Hispasat.
I tried patching my Comag (to get TV Cabo in Nagra 1), but without much success, so I'm scrapping that idea. I've now decided to get a CAM. But of course, I only want the cheapest one that can just do Nagravision 1, because... that's... all... I... need.
A Dragon is out of the question because it's too expensive, and I've heard there are problems using it with a Comag anyway.
Preferably, I'm looking for a CAM that's ready to go (no mucking about with interfaces and programming, I'm no good with all that), and after some research I've found that TV Cabo may be autoupdating in some CAMs!
So the basic question is: is there a CAM out there that is cheap, decodes Nagra 1 (either autoupdating, or remote updating), and doesn't need loader cards and stuff?
-rapido
PS I've heard mainly about the Matrix Revolutions 2.21 - would that be any good? £40 is quite a lot for me, but if its my only choice :-(