Reply to thread

Message: <blockquote data-quote="Lazarus" data-source="post: 668232" data-attributes="member: 323322">You have a 4 way DiSEqC switch - this is what enables four LNBs to end up with only one cable feeding the Receiver suite.The correct LNB is selected by DiSEqC commands from the Receiver(s) and it seems very likely that you haven't set up these commands correctly in the Comag.So what you need to do is look carefully at the settings on the original box: I imagine you know which four Satellites it is capable of receiving, so you need to look at the DiSEqC setting for each of those four (Should be something like A,B, C, D or 1, 2, 3, 4) and basically apply the self-same settings to the Comag.That DiSEqC switching should also happily work for the Comag providing the original box is in Standby.</blockquote>