Reply to thread

Message: <blockquote data-quote="colgakn" data-source="post: 668332" data-attributes="member: 342981">ok, I made some progress - I disconnected the loop cable and put the satellite input cable into Input 1. Then I changed the settings on Astra and Astra2 so that they both use Input 1 and not the LOOP setting. When I power on the system, I get pictures on both satellites now. However this means I lose the ability to record one channel while watching another.Do you have any idea how I could still use the LOOP mode but not have to re-install the Satellite tuner mode each time? (by the way, I noticed that to get the signal to come back you need to change the setting from 1 to 2 to LOOP and then it works)</blockquote>