Reply to thread

Message: <blockquote data-quote="Terryl" data-source="post: 1133424" data-attributes="member: 369937">With a standard 36 volt linear motor for a satellite dish your still going to have to use one set of wires for the DC power and one set of wires for the control signals from any "V" box or control box your going to use.Also your working with a DC voltage, the longer the run out to the dish for the power, the bigger the wire gauge needs to be, this to compensate for voltage loss or drop in the wire due to the amperage required by the motor. Use to thin a wire gauge and you may or will have problems.</blockquote>