Reply to thread

Message: <blockquote data-quote="Vipersan" data-source="post: 741461" data-attributes="member: 325666">Hi Wod ..I currently use an old Echostar AP3000 receiver...though I have also used an old NEC stand alone positioner in the past ..I hope one day to replace the Echostar with another V box ..working on the theory that I can send one signal from any of the receivers ...(diseqc 1.2) ...down the LNB feed ...which will loop back and be split between both V-boxes ...thus moving both actuators ..and therefore setting both the position on the arc ...and the elevation offset on any given bird ..Providing both v boxes are set say to position 1 ..for bird A ...position 2 for Bird B ..etc etc ..This will fully automate the process ..at a minimal cost..As to the 8 inch jack being strong enough ..I may take CH's advice and employ a counterweight at some point..rgdsVS</blockquote>