Reply to thread

Message: <blockquote data-quote="a33" data-source="post: 992039" data-attributes="member: 332642">[USER=409345]@Jaska-oz[/USER] :The 4/1 switch would be a diseqc 1.0 switch, so you have to give diseqc 1.0 commands. In the picture you don't.The motor not only needs a motor command, but also a diseqc 1.0 command in this setup!BTW Your drawing in #45 is different from the drawings in #41; there you have a motorized dish on both switches?That way you make it very very difficult to really help you :-(BTW2 I would connect motor between receiver and switch, not between switch and LNB. Then you wouldn't need diseqc repeats or so, so a possible problem cause less. Is that possible for you?Greetz,A33</blockquote>