Reply to thread

Message

<blockquote data-quote="jackpeas" data-source="post: 5350"><p>HI OLD SAT, I tried everything to get GO-ch9 (my download ch to come in) Remember we had the declination rod out 31 turn from the ring (top 2 rod only) So I put 2 nuts their,to mark the spot where the 31 turn end. So I can get it back there. Then I move the cross member in to 2 1/4 from the ring, that where it is now. The bottom bolts are 2&quot; from the ring. That where it was before I found you guys.But GO ch24 (outdoor CH) is not come in very good,I am getting good reading but my digital wont come in.Those bolts in the declination rod (top2 3/4x8&quot;long to the ring and from the inside of the ring out 3/4x 11&quot; and the bottom2 are 3/4x 6&quot; long 3/4x 8 3/4&quot; out. When I couldn't get GO, I move the feed, I move the elevation rod too.I went back to AMC3 K3 @87 tiring to get it to come in better.Yes it seem to me the sat are coming in good on the eastside but the k5@79, sbs6, 74deg, w6-k6@72 It could be the trees, I don't go any further east because of the limit. So from AMC3 to F1-A2@ 107 everything is good.But going west M5, A1-E1.GO-ox,G5,G9,T7-L7,C3,G1, I get something but it not clear. 2 sat come in ,AMC C4, andAMC7 Ch 7 fox come in, west end sat.I have trees but idon't think they are blocking GO. Maybe the other. Thank you jackp n Chicago&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Hey I had that Ideal about useing my 18&quot;&nbsp; actuator arm for elevation,but I don't have a controler(all I have is a positioner)</p></blockquote><p></p>

[QUOTE="jackpeas, post: 5350"] HI OLD SAT, I tried everything to get GO-ch9 (my download ch to come in) Remember we had the declination rod out 31 turn from the ring (top 2 rod only) So I put 2 nuts their,to mark the spot where the 31 turn end. So I can get it back there. Then I move the cross member in to 2 1/4 from the ring, that where it is now. The bottom bolts are 2" from the ring. That where it was before I found you guys.But GO ch24 (outdoor CH) is not come in very good,I am getting good reading but my digital wont come in.Those bolts in the declination rod (top2 3/4x8"long to the ring and from the inside of the ring out 3/4x 11" and the bottom2 are 3/4x 6" long 3/4x 8 3/4" out. When I couldn't get GO, I move the feed, I move the elevation rod too.I went back to AMC3 K3 @87 tiring to get it to come in better.Yes it seem to me the sat are coming in good on the eastside but the k5@79, sbs6, 74deg, w6-k6@72 It could be the trees, I don't go any further east because of the limit. So from AMC3 to F1-A2@ 107 everything is good.But going west M5, A1-E1.GO-ox,G5,G9,T7-L7,C3,G1, I get something but it not clear. 2 sat come in ,AMC C4, andAMC7 Ch 7 fox come in, west end sat.I have trees but idon't think they are blocking GO. Maybe the other. Thank you jackp n Chicago Hey I had that Ideal about useing my 18" actuator arm for elevation,but I don't have a controler(all I have is a positioner) [/QUOTE]

Verification