Reply to thread

Message

<blockquote data-quote="jackpeas" data-source="post: 5359"><p>HI OLD SAT,My wineguard dish is still good condition,It was align be fore I took it down.My wineguard is sweet dish I had no problem with it. I am at the point where I am saying to hell with DH satellite dish.All I wanted was to get a better picture, I dont know if that what I am getting.To installed a 5''x18'ft (4ft in the ground) pipe and buing the 5'' dish cap, taking it down, Is lot of work. We are not sure that it would work. I am sure we will be go back to the wineguard dish. This will be less problems. Now back to this feedhorn problem.I have me 2c&amp;2ku feed on the system.But I am only getting odds on one sat and even on the other(like bad servo motor) but on this feed their is no servo motor. I was thinking that it don't make and difference where the c-band lnb go. I have misplace my tracker10 book which has this info. My hidden signals sat-book I can't find this info. That why I change the feed out to make sure it not the servo motor, now i know it the placement of the feed, so far in from the dish and turn the right way. I am up 12'ft in the air on a ladder reachering about 3' or4' ft to do this on top of a camper. Go back to the basic on installing the feed (I will mark it on the scala ring) where it go. I have a lot of scala rings. Iam not using the one with DBS lnb on it .You ask me about the Manual-book from DH SAtellite, I would not called that a manual what I got( look like some one made a copy) I will get warren to make a copy from their site. I had no problem installing my wineguard. Might of fact the f/d is 41''. My buddy Ozzie made me a tool for installing the feed on this one Ok. thank you jackp n chicago</p></blockquote><p></p>

[QUOTE="jackpeas, post: 5359"] HI OLD SAT,My wineguard dish is still good condition,It was align be fore I took it down.My wineguard is sweet dish I had no problem with it. I am at the point where I am saying to hell with DH satellite dish.All I wanted was to get a better picture, I dont know if that what I am getting.To installed a 5''x18'ft (4ft in the ground) pipe and buing the 5'' dish cap, taking it down, Is lot of work. We are not sure that it would work. I am sure we will be go back to the wineguard dish. This will be less problems. Now back to this feedhorn problem.I have me 2c&2ku feed on the system.But I am only getting odds on one sat and even on the other(like bad servo motor) but on this feed their is no servo motor. I was thinking that it don't make and difference where the c-band lnb go. I have misplace my tracker10 book which has this info. My hidden signals sat-book I can't find this info. That why I change the feed out to make sure it not the servo motor, now i know it the placement of the feed, so far in from the dish and turn the right way. I am up 12'ft in the air on a ladder reachering about 3' or4' ft to do this on top of a camper. Go back to the basic on installing the feed (I will mark it on the scala ring) where it go. I have a lot of scala rings. Iam not using the one with DBS lnb on it .You ask me about the Manual-book from DH SAtellite, I would not called that a manual what I got( look like some one made a copy) I will get warren to make a copy from their site. I had no problem installing my wineguard. Might of fact the f/d is 41''. My buddy Ozzie made me a tool for installing the feed on this one Ok. thank you jackp n chicago [/QUOTE]

Verification