Dish size

[JackbGood1]

What size dish is needed to get the feeds from 7e in Strong in IRL.

 

[mapperuo]

I would say 1.2m going to 1.5m for the weaker ones.

 

[JackbGood1]

I would say 1.2m going to 1.5m for the weaker ones.

Have 1.2m dish, can't get signal for feeds say 11.124 h Racing

 

[ozumo]

Have 1.2m dish, can't get signal for feeds say 11.124 h Racing

Getting RMG Dubai HD on that transponder using a 1.2m Channel Master in cloudy north east England.

 

[mapperuo]

Have 1.2m dish, can't get signal for feeds say 11.124 h Racing

This is via my 1.2m dish in Scotland, it's pretty weak, Cloudy here.

 

[JackbGood1]

This is via my 1.2m dish in Scotland, it's pretty weak, Cloudy here.

View attachment 156450

Hi mate, what sort of LNB are u using, c+ Ku band

 

[JackbGood1]

Getting RMG Dubai HD on that transponder using a 1.2m Channel Master in cloudy north east England.

Probably need bigger as I'm in the Midlands in Ireland

 

[Terryl]

Here is a series of footprint maps of 7E, it is an active map so all you do is select the beam for the transponder your looking for and zoom into your location, then click on it, it will give you an estimated dish size needed for a suitable and stable signal.

Satbeams - World Of Satellites at your fingertips

Satbeams - Satellite footprints, news and charts

satbeams.com

If you note, there are multiple beams on that series of satellites, just scroll to the end of the list at the top and select the Europe beam.

 

[Analoguesat]

One thing to watch though is broadcast channels tend to be be broadcast at a higher power than feeds, so dish size sites can be a bit misleading.