Reply to thread

Message: <blockquote data-quote="dreambox1959" data-source="post: 1135395" data-attributes="member: 314801">I am currently doing tests on the egis EPR103 I was surprised at the flow of the pulses.there is a double sensor on the axis of the motor (on the actuators the reed sensor is on the endless screw after the gear ratio) there is a pulse every 700µs instead of 14ms to 24ms for actuators.when the power supply to the motor is cut off, we still receive 10 pulses!!!I therefore pass the pulse signal through a divider by 4 (it also does filtering) and I arrive at correct operation.to keep all the pulses would require a much more powerful microprocessor and we would have 200 pulses per degree, which would be really exaggerated!!!!</blockquote>