Reply to thread

Message

<blockquote data-quote="dreambox1959" data-source="post: 1161166" data-attributes="member: 314801">I have been working on the EGIS engine for several months, I adapted my JPC-POSI (positioner) to this engine.AAL41 and FEMI have this model.I added an autofocus function based on the AGC signal, it's less precise than the SNR quality signal but it works very well.I also added a function which allows you to approach a position always from the EAST (by going beyond the position to then return), this allows you to make up for the mechanical play.I also did the same thing for the elevation.To be able to test in the best conditions, I mounted an old generation LNB (9.75/10.75 band selection by 14/18v) on a mechanical polarizer.Using a small adapter board, the SF8008 is configured in user-defined LNB mode: the 22k is diverted to activate the band change and the 14/18V changes the H/V polarity.I would like to know if any forum readers would be interested in my EGIS positioner version or in this adapter intended for polarotor chaparral type installations.[ATTACH=full]155688[/ATTACH]</blockquote>

[QUOTE="dreambox1959, post: 1161166, member: 314801"] I have been working on the EGIS engine for several months, I adapted my JPC-POSI (positioner) to this engine. AAL41 and FEMI have this model. I added an autofocus function based on the AGC signal, it's less precise than the SNR quality signal but it works very well. I also added a function which allows you to approach a position always from the EAST (by going beyond the position to then return), this allows you to make up for the mechanical play. I also did the same thing for the elevation. To be able to test in the best conditions, I mounted an old generation LNB (9.75/10.75 band selection by 14/18v) on a mechanical polarizer. Using a small adapter board, the SF8008 is configured in user-defined LNB mode: the 22k is diverted to activate the band change and the 14/18V changes the H/V polarity. I would like to know if any forum readers would be interested in my EGIS positioner version or in this adapter intended for polarotor chaparral type installations. [ATTACH type="full" width="644px"]155688[/ATTACH] [/QUOTE]

Verification