Reply to thread

Message: <blockquote data-quote="Hugocz" data-source="post: 1145057" data-attributes="member: 415382"><p>I supplemented my HW version 1.0 positioner design with an external control module for two servo motors. I use one servomotor to control the CSP 1210 C polarizer. I also tried to control the Corotor Chaparral. Everything works with a 17 m long cable. With the aforementioned servomotors of an older design, it is annoying that the control signal must be present on the data wire for the entire time the motor is moving. <a href="https://www.jevicko.org/egis/index.php/en/archives/hw-version-1-0/servo-motor-module" target="_blank">Details can be found in the article here.</a></p></blockquote><p></p>