Reply to thread

Message

<blockquote data-quote="RustySpoons" data-source="post: 1074864" data-attributes="member: 412012">What i'm trying to do is have a fixed dish on 28.2e and both LNB feeds from the motor dish to the STB.In my house my other half will usually have a timed recording on 28.2e and I want to be able to change channels on 28.2e or watch something on another Satellite. So that's why I put the fixed dish up for 28.2e and it's quicker than moving the dish as that satellite is the most used here (My other half lol)I thought if I use both feeds off my motor dish I can watch/record off what ever Satellite it is sat on, or stream to the other room. And by having the fixed dish there on one of the Tuners with a Diseqc switch it can quickly go to 28.2e or record 28.2e when the motor dish is on another satellite.The problem with having motorised dish on Tuner A and the 28.2e dish on Tuner B is I only have 1 LNB on the motorised dish connected to the STB so cannot watch/stream other channels if its recording anything on the motorised dish. I do have 2x 1.2m CM here as well, but one is being used for Es'Hail2/QO100 Tx/Rx, the other is on a Moteck H180 I haven't put up yet, I could just have 2 motorised dishes on the Mutant but thought there must be a way to have both tuners working on the Motorised dish and one of those tuners being able to switch to the Fixed 28.2e dish as well.</blockquote>

[QUOTE="RustySpoons, post: 1074864, member: 412012"] What i'm trying to do is have a fixed dish on 28.2e and both LNB feeds from the motor dish to the STB. In my house my other half will usually have a timed recording on 28.2e and I want to be able to change channels on 28.2e or watch something on another Satellite. So that's why I put the fixed dish up for 28.2e and it's quicker than moving the dish as that satellite is the most used here (My other half lol) I thought if I use both feeds off my motor dish I can watch/record off what ever Satellite it is sat on, or stream to the other room. And by having the fixed dish there on one of the Tuners with a Diseqc switch it can quickly go to 28.2e or record 28.2e when the motor dish is on another satellite. The problem with having motorised dish on Tuner A and the 28.2e dish on Tuner B is I only have 1 LNB on the motorised dish connected to the STB so cannot watch/stream other channels if its recording anything on the motorised dish. I do have 2x 1.2m CM here as well, but one is being used for Es'Hail2/QO100 Tx/Rx, the other is on a Moteck H180 I haven't put up yet, I could just have 2 motorised dishes on the Mutant but thought there must be a way to have both tuners working on the Motorised dish and one of those tuners being able to switch to the Fixed 28.2e dish as well. [/QUOTE]

Verification