Reply to thread

Message: <blockquote data-quote="macx" data-source="post: 851090" data-attributes="member: 400868">Having established that the LNB is not faulty I mounted same to the side of the existing as shown elsewhere on the forum. With the dielectric plate inserted in the different positions and slowly turning the LNB full circle and then again without the plate. The LNB was also slowly moved slowly to and from the dish as well as adjusting the angle pointing at the dish, all this and not a flicker on the level bar pointing 5W. The weather is fine and is heading to the fridge to get a chilly philly.  cheers macx.</blockquote>