Reply to thread

Message

<blockquote data-quote="Channel Hopper" data-source="post: 1151908" data-attributes="member: 175144">Allegedly a recovery tool, but I can't see a file anywhere[URL unfurl=&quot;true&quot;]https://viva-tv.ru/vm-goldmaster-sr-515hd/instrukcija-po-vosstanovleniju-goldmaster-sr-508-i-sr-525-4314/[/URL]Instructions (translated), but it looks genericRestoring a receiver on a Montage processor via a USB flash driveFormat the USB flash drive on your computer to the FAT32 file system.2. Download the firmware for your receiver model, rename its name to flash.bin and copy it to the root of the USB flash drive.3. Connect the USB flash drive to the USB port of the turned off receiver.4. Turn on the receiver by connecting the power supply and immediately cycle through it at intervals of 1 second. start pressing the Menu button on the remote control 5-10 times. When starting the firmware, the receiver may write “USB upgrade! Don’t power off!” or nothing at all can be displayed on the TV screen. If the flashing is successful, the receiver will reboot a few minutes after the start of the recovery and will boot completely. If the receiver does not reboot after 2-3 minutes, then the procedure must be repeated.5. After loading the receiver, go to Menu – Settings – Reset to factory settings and reset the settings. The default password is 0000.</blockquote>

[QUOTE="Channel Hopper, post: 1151908, member: 175144"] Allegedly a recovery tool, but I can't see a file anywhere [URL unfurl="true"]https://viva-tv.ru/vm-goldmaster-sr-515hd/instrukcija-po-vosstanovleniju-goldmaster-sr-508-i-sr-525-4314/[/URL] Instructions (translated), but it looks generic [I]Restoring a receiver on a Montage processor via a USB flash drive Format the USB flash drive on your computer to the FAT32 file system. 2. Download the firmware for your receiver model, rename its name to flash.bin and copy it to the root of the USB flash drive. 3. Connect the USB flash drive to the USB port of the turned off receiver. 4. Turn on the receiver by connecting the power supply and immediately cycle through it at intervals of 1 second. start pressing the Menu button on the remote control 5-10 times. When starting the firmware, the receiver may write “USB upgrade! Don’t power off!” or nothing at all can be displayed on the TV screen. If the flashing is successful, the receiver will reboot a few minutes after the start of the recovery and will boot completely. If the receiver does not reboot after 2-3 minutes, then the procedure must be repeated. 5. After loading the receiver, go to Menu – Settings – Reset to factory settings and reset the settings. The default password is 0000.[/I] [/QUOTE]

Verification