Reply to thread

Message

<blockquote data-quote="gdf68" data-source="post: 1162029" data-attributes="member: 418659">The receiver will only move the dish to the selected sat eg 0.8w if I select an actual channel scan on the RAMF app via channel search ( see pic) .&nbsp; &nbsp; I don't actually want to perform a scan just check signal quality.&nbsp;&nbsp; I'm using usals . The dish is positioned in 0.8w as you can see from the signal check menu but if I then want to check signal on say 4.8e I have to select channel search from the app menu and click actual scan for the dish to move to 4.8,&nbsp; &nbsp; am sure when I first got this I could press signal check and the receiver would move to the sat.[ATTACH=full]156163[/ATTACH][ATTACH=full]156162[/ATTACH][ATTACH=full]156165[/ATTACH]On my e2 boxes you can goto sat positioner and select the required sat it moves the motor , you then get a output of signal strength,/quality without having to scan the sat.nyone got the manual I can read again .</blockquote>

[QUOTE="gdf68, post: 1162029, member: 418659"] The receiver will only move the dish to the selected sat eg 0.8w if I select an actual channel scan on the RAMF app via channel search ( see pic) . I don't actually want to perform a scan just check signal quality. I'm using usals . The dish is positioned in 0.8w as you can see from the signal check menu but if I then want to check signal on say 4.8e I have to select channel search from the app menu and click actual scan for the dish to move to 4.8, am sure when I first got this I could press signal check and the receiver would move to the sat. [ATTACH type="full" alt="1000001882.png"]156163[/ATTACH] [ATTACH type="full" alt="1000001881.png"]156162[/ATTACH] [ATTACH type="full"]156165[/ATTACH] On my e2 boxes you can goto sat positioner and select the required sat it moves the motor , you then get a output of signal strength,/quality without having to scan the sat. nyone got the manual I can read again . [/QUOTE]

Verification