Reply to thread

Message

<blockquote data-quote="Turok" data-source="post: 524699" data-attributes="member: 192339">Hello!after a long search i found this information!orginal textEnigma 2 for Kathrein UFS 910 --------------------------------------------------------------------------------Team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910.This image should be seen as a proof of concept - there are many bugs and some hardwarewhich is not supported at the moment. If you are a developer, and you have experience in(embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome!To test this enigma2 image you need a running nfs server and a serial &amp; networkconnection to the receiver.1. extract the tgz file on the server and set the directory in /etc/exportsfor example:/nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)2. restart nfs server3. connect via serial console to the receiver4. turn on the receiver and hit enter in serial consoleyou should see the following prompt:Hit any key to stop autoboot: 0STB7100-REF&gt; no more information avalible at the moment,when i found more,i wil post here!</blockquote>

[QUOTE="Turok, post: 524699, member: 192339"] Hello! after a long search i found this information! orginal text Enigma 2 for Kathrein UFS 910 -------------------------------------------------------------------------------- Team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910. This image should be seen as a proof of concept - there are many bugs and some hardware which is not supported at the moment. If you are a developer, and you have experience in (embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome! To test this enigma2 image you need a running nfs server and a serial & network connection to the receiver. 1. extract the tgz file on the server and set the directory in /etc/exports for example: /nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check) 2. restart nfs server 3. connect via serial console to the receiver 4. turn on the receiver and hit enter in serial console you should see the following prompt: Hit any key to stop autoboot: 0 STB7100-REF> no more information avalible at the moment,when i found more,i wil post here! [/QUOTE]

Verification