Reply to thread

Message

<blockquote data-quote="SwissBuster" data-source="post: 520878" data-attributes="member: 290639">Here's a screen shot of the 'manual setup 'page. As you can see I've selected the satellite at 28.5°E. Then I have frequency, symbol rate and polarisation which all seem pretty clear. The next three fields are PCR-PID, Audi-PID and Video-PID. My guess for channel 4 would be Video-PID = 2312 and an audio-PID = 2313. But's what's the PCR-PID? My guess was the SID value from Lyngsat but the value of 8335 wasn't accepted on my system. I also have the option of a transponder scan where I only have to select the satellite, frequency, symbol rate and polarisation. Whenever I run this with these settings, the system only finds Film4, nothing else. This was true today when the signal strength was slightly higher than the last few days at 5.8dB (typically it's around 5.0).No-where on my system can I find a menu which tells me what this setup data is for a particular channel. I looked for this to help me decode these inputs for a known channel, but gave up after going through every single menu combination and finding nothing.</blockquote>

[QUOTE="SwissBuster, post: 520878, member: 290639"] Here's a screen shot of the 'manual setup 'page. As you can see I've selected the satellite at 28.5°E. Then I have frequency, symbol rate and polarisation which all seem pretty clear. The next three fields are PCR-PID, Audi-PID and Video-PID. My guess for channel 4 would be Video-PID = 2312 and an audio-PID = 2313. But's what's the PCR-PID? My guess was the SID value from Lyngsat but the value of 8335 wasn't accepted on my system. I also have the option of a transponder scan where I only have to select the satellite, frequency, symbol rate and polarisation. Whenever I run this with these settings, the system only finds Film4, nothing else. This was true today when the signal strength was slightly higher than the last few days at 5.8dB (typically it's around 5.0). No-where on my system can I find a menu which tells me what this setup data is for a particular channel. I looked for this to help me decode these inputs for a known channel, but gave up after going through every single menu combination and finding nothing. [/QUOTE]

Verification