Reply to thread

Message

<blockquote data-quote="radiotech" data-source="post: 24408" data-attributes="member: 175946"><p>Hi all, i have read all the post that i can find regarding gizlog1.3 and twinhan pci card.&nbsp; However, gizlog still does not work for me.&nbsp; I intsalled gizlog1.3.&nbsp; I also use the thstreamreader03 from austech.info.&nbsp; I set the LOF1&amp;2 = 10750000 (this for telstar 5 north america), fre= 10290000 (for TFC provider) and symbolrate= 20000000.&nbsp; Polarity= 0 (H). PID is the one i found from lyngsat, PID = 10FF.&nbsp; I also put the infor (MKH, HSN, PMK) from a valid card.&nbsp; Still, every time Gizlog run, it give me fail to open channel.&nbsp; I use the same set up with mytheatry, probDVB, johndec, winDTV and they all work and log well.&nbsp; Regarding the PID, is it the emm-PID or just the VPID provided by lyngsat?&nbsp; If anyone who succesfully test the gizlog1.3 and twinhan pci card, please help me.&nbsp; thank you in advance.&nbsp; by the way, i can log using twinlog and twinhan card. I then use the bin2log to convert the logged.bin to logged.txt.&nbsp; Never find any EMK keys.&nbsp; How do i know if i log garbage or not?</p></blockquote><p></p>

[QUOTE="radiotech, post: 24408, member: 175946"] Hi all, i have read all the post that i can find regarding gizlog1.3 and twinhan pci card. However, gizlog still does not work for me. I intsalled gizlog1.3. I also use the thstreamreader03 from austech.info. I set the LOF1&2 = 10750000 (this for telstar 5 north america), fre= 10290000 (for TFC provider) and symbolrate= 20000000. Polarity= 0 (H). PID is the one i found from lyngsat, PID = 10FF. I also put the infor (MKH, HSN, PMK) from a valid card. Still, every time Gizlog run, it give me fail to open channel. I use the same set up with mytheatry, probDVB, johndec, winDTV and they all work and log well. Regarding the PID, is it the emm-PID or just the VPID provided by lyngsat? If anyone who succesfully test the gizlog1.3 and twinhan pci card, please help me. thank you in advance. by the way, i can log using twinlog and twinhan card. I then use the bin2log to convert the logged.bin to logged.txt. Never find any EMK keys. How do i know if i log garbage or not? [/QUOTE]

Verification