Reply to thread

Message

<blockquote data-quote="Vipersan" data-source="post: 1005901" data-attributes="member: 325666">Curiouser and curiouser ..I have never manually altered the limits in this motor ..AFAIK ..dark motors are allowed +- 80 AZ by default in Diseqc 1.2 ?Here is the spec:-․ H-H MountProtocol DiSEqC 1.2 &amp; Goto “X”Compatible Receiver Receiver with DiSEqC 1.2 or Interface BoxAntenna Size 120 cm Max.Speed 1.9° / sec (at 13V) ; 2.5° / sec (at 18V)Azimuth Angle 80° East ~ 80° West ( 160° )Elevation Angle 25~75°Input Voltage 13 / 18VdcOutput Voltage 13 / 18VdcPower Consumption 50 mA (Standby)200mA (Normal)350mA (Max.)Satellite Positions 60 positionsCalibration Function Yes ( Go to 0°)Manual East/West Buttons Yes (Build-in on the bottom of the Mount)Limit Protection 1.Fixed type with microswitches2.Programmable Software Limit3.Current LimitPositioning Sensor High Resolution Hall Effect SensorConnector F-TypeWeight ( Mount ) 3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs)Dimension ( Mount ) 345 x 168 x 110 mm3 (Gross)DiSEqC is a trademark of EUTELSATI am of course driving the motor in usals diseqc 1.3 ...BUT..providing the box can do the calculation ...it theoretically should go there ?or maybe I'm missing something.certainly the F15 can drive it there ...in usals mode with no motor adjustment..?</blockquote>

[QUOTE="Vipersan, post: 1005901, member: 325666"] Curiouser and curiouser .. I have never manually altered the limits in this motor .. AFAIK ..dark motors are allowed +- 80 AZ by default in Diseqc 1.2 ? Here is the spec :- ․ H-H Mount Protocol DiSEqC 1.2 & Goto “X” Compatible Receiver Receiver with DiSEqC 1.2 or Interface Box Antenna Size 120 cm Max. Speed 1.9° / sec (at 13V) ; 2.5° / sec (at 18V) Azimuth Angle 80° East ~ 80° West ( 160° ) Elevation Angle 25~75° Input Voltage 13 / 18Vdc Output Voltage 13 / 18Vdc Power Consumption 50 mA (Standby) 200mA (Normal) 350mA (Max.) Satellite Positions 60 positions Calibration Function Yes ( Go to 0°) Manual East/West Buttons Yes (Build-in on the bottom of the Mount) Limit Protection 1.Fixed type with microswitches 2.Programmable Software Limit 3.Current Limit Positioning Sensor High Resolution Hall Effect Sensor Connector F-Type Weight ( Mount ) 3.1 Kg (Net) / 3.5 Kg (Gross) (~ 8 lbs) Dimension ( Mount ) 345 x 168 x 110 mm3 (Gross) DiSEqC is a trademark of EUTELSAT I am of course driving the motor in usals diseqc 1.3 ...BUT ..providing the box can do the calculation ...it theoretically should go there ? or maybe I'm missing something. certainly the F15 can drive it there ...in usals mode with no motor adjustment.. ? [/QUOTE]

Verification