Reply to thread

Message: <blockquote data-quote="Analoguesat" data-source="post: 240640" data-attributes="member: 176362">DONT try flashing the receiver with ANYTHING unless you are 150% sure its the right software for your box. You WILL almost certainly ruin the box if you flash it with the wrong s/w!Very smply you connect the receiver to the computer using most likley a null modem cable, run a loader programme then instruct the loader programme where the flash s/w is on the computer. It then overwrites the existing s/w on the receiver.The exact procedure varies from box to box, so do some reading up BEFORE you try anything.</blockquote>