Reply to thread

Message: <blockquote data-quote="Robbo" data-source="post: 748361" data-attributes="member: 256551">As Analogue says, it doesn't really matter much, as you can't mess with it yourself, its up to the management to get it sorted.A point of interest only, a splitter can go first, it would depend on the the layout of the system,the level from the dish and the length of the runs etc, i.e as long as the levels and BER are within spec at the wall points then it is OK.  A splitter gives attenuation in the line of approx 3 dB or so, which is roughly equivalent to 10m of cable, so if the dish cable is short enough, the splitter is fine for example. The system designer would (or should) have taken that into account when he put the system together.</blockquote>