Reply to thread

Message: <blockquote data-quote="dreambox1959" data-source="post: 1131596" data-attributes="member: 314801">diseqc 1.2 motors certainly do not have the same number of pulses depending on the brand. I used the diseqc command 68 and 69 where it is possible to set the number of steps (it can be from 1 to 127, I chose 8 I can change it!). in my program I planned that the LNB number be assigned to the 16 positions of the hard rotor (from 1 to 16) (0 = due south) but everything is configurable at the rotor level. the LNB changer can be configured with the jpcposi or a receiver provided that the first 16 positions are assigned.</blockquote>