Reply to thread

Message

<blockquote data-quote="dreambox1959" data-source="post: 1139517" data-attributes="member: 314801">In my adaptation of my positioner for the EGIS motor there is a case that I had not completely foreseen:-it is a prime focus antenna, there is necessarily a mechanical polarotor or equivalent.Several users have dual-band, single-polarisation LNBs with LO switching via 14/18V (there are also 22k LNBs but they don't want to throw away their current expensive LNBs).-I found a simple solution: configure the enigma2 receiver with a universal head (14/18v = polar, 22khz = band), my posi intercepts the two informations and uses the 14/18v to manage the H/V polarity and the presence of the 22khz to change the power value of the old standard lnb.-Luckily both information are already retrieved by the current DISEQC setup and the 14/18v command for the old head is very simple to add.Among the users there is also an Italian friend who is in this case on a prime focus on polar mount .-with this addition I should be able to answer all cases of configurations</blockquote>

[QUOTE="dreambox1959, post: 1139517, member: 314801"] In my adaptation of my positioner for the EGIS motor there is a case that I had not completely foreseen: -it is a prime focus antenna, there is necessarily a mechanical polarotor or equivalent. Several users have dual-band, single-polarisation LNBs with LO switching via 14/18V (there are also 22k LNBs but they don't want to throw away their current expensive LNBs). -I found a simple solution: configure the enigma2 receiver with a universal head (14/18v = polar, 22khz = band), my posi intercepts the two informations and uses the 14/18v to manage the H/V polarity and the presence of the 22khz to change the power value of the old standard lnb. -Luckily both information are already retrieved by the current DISEQC setup and the 14/18v command for the old head is very simple to add. Among the users there is also an Italian friend who is in this case on a prime focus on polar mount . -with this addition I should be able to answer all cases of configurations [/QUOTE]

Verification