Horizon HDSM USB - Latest Firmware and software

[easymo3]

Possibly not

II use Lyngsat

I can send pat files I have depending on what sats you need. thanks

HI, many thanks for your reply. I only need astra 28.2e with with sky Q as well so i can align standard sky aswell as sky Q
I have A labgear 501 as well but the horizon is so much easier to use.

 

[cityaerials]

HI, many thanks for your reply. I only need astra 28.2e with with sky Q as well so i can align standard sky aswell as sky Q
I have A labgear 501 as well but the horizon is so much easier to use.

Latest hex list i have has a few Ast2 tps that all work i think

Please see some example tps but some may be outdated now but can be updated.

 

[reDaCted]

Possibly not

II use Lyngsat

I can send pat files I have depending on what sats you need. thanks

Hi. Thanks for getting back to me. Looking for Astra 28.2, Astra 19, Hotbird 13 and Sky Q mainly. Anything recent .pat files you have on those would be great! Thanks

 

[easymo3]

Thank you so much for this, installed onto my meter, will test tomorrow to see which tps are working,

Thanks again

 

[cityaerials]

Thank you so much for this, installed onto my meter, will test tomorrow to see which tps are working,

Thanks again

Thanks, please let me know any that don't work

 

[easymo3]

Tested today, all tp's on 28.2e are working fine apart from one on sky Q tp26 did not lock.
I also have A motorised dish, if I get the time I will check the other satellites.

 

[cityaerials]

Tested today, all tp's on 28.2e are working fine apart from one on sky Q tp26 did not lock.
I also have A motorised dish, if I get the time I will check the other satellites.

hi, Thanks for checking these. I see Tp26 is now H S2, so have changed to tp22

 

[cityaerials]

Hi. Thanks for getting back to me. Looking for Astra 28.2, Astra 19, Hotbird 13 and Sky Q mainly. Anything recent .pat files you have on those would be great! Thanks

i will go through and update these as find dead tps etc.

 

[easymo3]

Thanks, loaded your latest set, all working great.
I noticed on sky Q there are 5 horizontal and 1 vertical, is that deliberate?

 

[cityaerials]

Thanks, loaded your latest set, all working great.
I noticed on sky Q there are 5 horizontal and 1 vertical, is that deliberate?

no should be 5 of each

 

[cityaerials]

Thanks, loaded your latest set, all working great.
I noticed on sky Q there are 5 horizontal and 1 vertical, is that deliberate?

what meter version do you have?
I'm guessing older v2.5 and cutting of at 32 tps?

I can do a list with just 32 main ones on

 

[easymo3]

no should be 5 of each

View attachment 144239

Strange that!, I only have the vertical TP90 installed, not sure how, I will try and reinstall them, thanks for confirming.

 

[easymo3]

what meter version do you have?
I'm guessing older v2.5 and cutting of at 32 tps?

I can do a list with just 32 main ones on

Yes, I have the 2.5version, works great, I only need it for 28.2 really.

 

[easymo3]

That would be great if can do A list with the 32 main ones on.
I am not sure how I would do it!

 

[cityaerials]

That would be great if can do A list with the 32 main ones on.
I am not sure how I would do it!

Try this

 

[easymo3]

Thanks, about perfect for what I want!
All sky Q work and lock
all 28.2e lock apart from tp26.

 

[cityaerials]

Thanks, about perfect for what I want!
All sky Q work and lock
all 28.2e lock apart from tp26.

 

[easymo3]

Many thanks for all your help, I will load the last one you posted in A day or so, you have brought my trusted meter back to life, they really are great meters for aligning dishes, just pick your satellite and wait for the lock!
I have the Labgear 501 as well but they are A little cumbersome but do the job as well, just easier with the horizon.
I use A Unhom datum 10 for terrestrial aerial alignment.

 

[markalmond]

hi , can someone help, i have Horizon hd s2 but from today 3/8/22 the Turksat 42e tp has changed , tried to update the tp manually but no luck

 

[Manikm909]

which TP ?