Reply to thread

Message

<blockquote data-quote="satelliteman" data-source="post: 733388" data-attributes="member: 255812">Follow these instructions as detailed.&gt;&gt;&nbsp; Make sure the motor inclination bracket is set to the correct markings and all bracketry / masting are level.&gt;&gt;&nbsp; Place the dish centre on the motor shaft and tighten.&gt;&gt;&nbsp; Lift the dish with motor onto the mast and aim to a rough South using a compass.&gt;&gt;&nbsp;&nbsp; Calibrate the motor then insert YOUR coordinates via USALs.&gt;&gt;&nbsp; Motorise dish / send to either 1W or 5W. [The motor will move to the calculated position based on your longitude].&gt;&gt;&nbsp; Align the dish to either of the above satellites [depending on which you select]. This is done by swinging the motor and dish together AS ONE and by adjustment of the dish elevation bracket.&gt;&gt;&nbsp; Once you confirm you have hit the correct satellite, check either ends of the arc for tracking. If you're off, spring the dish to see where the correction has to be made.</blockquote>

[QUOTE="satelliteman, post: 733388, member: 255812"] Follow these instructions as detailed. [B]>> Make sure the motor inclination bracket is set to the correct markings and all bracketry / masting are level. >> Place the dish centre on the motor shaft and tighten. >> Lift the dish with motor onto the mast and aim to a rough South using a compass. >> Calibrate the motor then insert YOUR coordinates via USALs. >> Motorise dish / send to either 1W or 5W. [The motor will move to the calculated position based on your longitude]. >> Align the dish to either of the above satellites [depending on which you select]. This is done by swinging the motor and dish together AS ONE and by adjustment of the dish elevation bracket. >> Once you confirm you have hit the correct satellite, check either ends of the arc for tracking. If you're off, spring the dish to see where the correction has to be made.[/B] [/QUOTE]

Verification