Vipersan
Emmett Browns Ghost
- Joined
- Jun 29, 2009
- Messages
- 10,918
- Reaction score
- 6,663
- Points
- 113
- Age
- 67
- My Satellite Setup
-
IP9000HD +
TD110 Dish and TD88 Dish in Tandem
66°East to 60°West.
AZbox PrmHD + OpnbxS9HD + Skybox + DrHD F15
2x VboxII AZ-EL
2 m+ Alcoa PF + BSC421 C-Band lnbf...
+SS2/TwHnS2-3200 pci/TBS6925 pci
1.5 Fortec Star -Gbox - HtoH Ku/Ka/C
- My Location
- UK
...this one will blow your mind ..
I don't believe anyone in the UK has so far managed this one ..
Its mighty tricky at best ..
at least not on a set top box anyway.
4027 L
tp C3 Dunamis TV DVB-S2
MPEG-4 1200-3/4
8PSK
on Eutelsat 5 West A at 5.0°W
Well ...now I have..
;)
and here's how
Due to it being Mpeg4 and extreme LSR and 8PSK..
Scanning this by inputting details was useless ..
As was blind scanning ..even with the smallest steps ..
So I used a previously scanned but now vacated slot ..already stored in the channel list..
This is why it will appear in the photo as 'Digital 1' ..which used to be a music channel on 4117
So instead of trying to input this channel data ..I edited Digital 1 to the correct frequency ...and edited again to change the symbol rate to 1200
With me so far ..
The F15 then tried to lock this hybrid channel ...but of course could not ..as all the PIDS and modulation type were all wrong ..
But signal level was now hovering around 6.5 db...
So I then went to the PID scan menu and forced the hybrid channel to rescan the PIDS ..
it took 6 attempts ..but eventually ..the red bar turned green ..and it went for it.
Now I have only to edit the chanel name from Digital 1 to Dunamis ..and we're done ..
Here is the proof it worked..
I suspect the increase in dish size helped ...but it might work for you..?
worth a try?
rgds
VS
I don't believe anyone in the UK has so far managed this one ..
Its mighty tricky at best ..
at least not on a set top box anyway.
4027 L
tp C3 Dunamis TV DVB-S2
MPEG-4 1200-3/4
8PSK
on Eutelsat 5 West A at 5.0°W
Well ...now I have..
;)
and here's how
Due to it being Mpeg4 and extreme LSR and 8PSK..
Scanning this by inputting details was useless ..
As was blind scanning ..even with the smallest steps ..
So I used a previously scanned but now vacated slot ..already stored in the channel list..
This is why it will appear in the photo as 'Digital 1' ..which used to be a music channel on 4117
So instead of trying to input this channel data ..I edited Digital 1 to the correct frequency ...and edited again to change the symbol rate to 1200
With me so far ..
The F15 then tried to lock this hybrid channel ...but of course could not ..as all the PIDS and modulation type were all wrong ..
But signal level was now hovering around 6.5 db...
So I then went to the PID scan menu and forced the hybrid channel to rescan the PIDS ..
it took 6 attempts ..but eventually ..the red bar turned green ..and it went for it.
Now I have only to edit the chanel name from Digital 1 to Dunamis ..and we're done ..
Here is the proof it worked..
I suspect the increase in dish size helped ...but it might work for you..?
worth a try?
rgds
VS