Reply to thread

Message: <blockquote data-quote="Archive4" data-source="post: 946866">No, It don´t help, but the thought was there, which helps a lot!Ran every dc test I could think of, then using the s1 ran tests with dBm and dBuV , got all the results I would expect, NOTHING WRONG. And to be fair, the whole set-up is working fine today with no problems. Now I am confused.Put a short circuit on the end of the cable, DC test gave me o.o Ohms, did a voltage test at back of box and end of cable, 13.2 on V 18.2 on H, same either end. Using s1 had 6dBm loss on actual signal, but same on SNR, so should not impact performance. Also recorded dBuV but nothing unusual there either.NEED CHOCOLATE</blockquote>