Reply to thread

Message: <blockquote data-quote="aceb" data-source="post: 1006399" data-attributes="member: 268811"><p>E2 errors can be caused by all sorts of issues, if it were me, and before I coughed up for a new actuator I would take the positioner, or even two positioners and with a new bit of cable connect to the actuator from out in your yard and retest it. As I'm a bit of a tightarse I used doubled up Cat5 cable for the 30m run to the 1.8 and it worked fine for about six months then for no reason started throwing up E2 errors when I sent it east. A new run of decent four core cable sorted it.</p></blockquote><p></p>