Reply to thread

Message: <blockquote data-quote="rolfw" data-source="post: 4505" data-attributes="member: 175057">Without the LNB type being set you may have difficulties setting up, the receiver needs to know this so that it can lock on to the correct frequencies.I don't know your receiver, but it probably has a pre-loaded database of transponders, so if the LNB setting is incorrect it will be off frequency. The bouncing signal can be caused by obstructions (unlikely if you had it working before), faulty LNB, it's unlikely that both will be faulty so try them one at a time with a direct connection, (excluding the DiseqC switch as this could also be faulty or the settings in the receiver incorrect).Rolf</blockquote>