Reply to thread

Message

<blockquote data-quote="a33" data-source="post: 1073102" data-attributes="member: 332642">Well, there are things that can still be tested. Because the strange thing is, that you seem to receive only frequencies Vertical Low from 19E, and nothing else. That would normally indicate something wrong in your receiver, could be settings, but has nothing to do with switching to UK channels on 28e.And if the problem is no voltage on F-plug or faulty cable, then all problems (to not being able to switch to other satellites or any other than V-Low 19E) follow.So why don't you check that with manual scans on all frequencies of <a href="https://nl.kingofsat.net/pos-19.2E.php" target="_blank">Astra 1KR / Astra 1L / Astra 1M / Astra 1N (19.2°E) - Alle uitzendingen - Frequenties - KingOfSat</a>, that you get only the matching channels on Vertical frequencies between 10700 til about 11900, and not on higher frequencies?Then we can conclude if there is or is not something wrong with you cable and/or receiver.You could also check what scanning possibilities your receiver has, to be able maybe to do a total BLIND scan, and avoid the lot of manual scans...greetz,A33</blockquote>

[QUOTE="a33, post: 1073102, member: 332642"] Well, there are things that can still be tested. Because the strange thing is, that you seem to receive only frequencies Vertical Low from 19E, and nothing else. That would normally indicate something wrong in your receiver, could be settings, [B]but has nothing to do with switching to UK channels on 28e.[/B] And if the problem is no voltage on F-plug or faulty cable, then all problems (to not being able to switch to other satellites or any other than V-Low 19E) follow. So why don't you check that with manual scans on all frequencies of [URL='https://nl.kingofsat.net/pos-19.2E.php']Astra 1KR / Astra 1L / Astra 1M / Astra 1N (19.2°E) - Alle uitzendingen - Frequenties - KingOfSat[/URL], that you get only the matching channels on [B]Vertical[/B] frequencies [B]between 10700 til about 11900[/B], and not on higher frequencies? Then we can conclude if there is or is not something wrong with you cable and/or receiver. You could also check what scanning possibilities your receiver has, to be able maybe to do a total BLIND scan, and avoid the lot of manual scans... greetz, A33 [/QUOTE]

Verification