Reply to thread

Message

<blockquote data-quote="a33" data-source="post: 1073115" data-attributes="member: 332642">So, unless somebody messed with the communal setup recently, this would be most typical of cable or receiver issue on your side: &quot;commands&quot; that are give via 22kHz or via (increased) voltage are not sent/received by the communal setup.So two more tests to conclude:1. When you scan for 11538Hor, do you get the programs for 11538 Vert? (like Russia Today)2. When you scan for 12388 Vert, do you also get the programs for 11538 Vert? (like Russia Today)If the answer to both questions is YES, no voltage (and subsequently 22kHz) from your receiver is received by the communal setup, and you definately have to check the cable and output voltage of your receiver.Also, a defective port (yours!) at the communal multiswitch could be possible.When there is another port free, one could try to change to that port; but that would be landlord's responsibility I guess.However, just to check: Have you had your receiver completely powerless (cut of from mains) at anytime since your reset recently, to restore from a possible automatic shortage protection? Don't know how your receiver would react to that, so please do that again (after the above two tests, and then test them again).Greetz,A33Edit; just to be sure, ad a third test:3. When you scan for 12388 Hor, do you also get the programs for 11538 Vert? (like Russia Today)</blockquote>

[QUOTE="a33, post: 1073115, member: 332642"] So, unless somebody messed with the communal setup recently, this would be most typical of cable or receiver issue on your side: "commands" that are give via 22kHz or via (increased) voltage are not sent/received by the communal setup. So two more tests to conclude: 1. When you scan for [B]11538Hor[/B], do you get the programs for 11538 Vert? (like Russia Today) 2. When you scan for [B]12388 Vert[/B], do you also get the programs for 11538 Vert? (like Russia Today) If the answer to both questions is YES, no voltage (and subsequently 22kHz) from your receiver is received by the communal setup, and you definately have to check the cable and output voltage of your receiver. Also, a defective port (yours!) at the communal multiswitch could be possible. When there is another port free, one could try to change to that port; but that would be landlord's responsibility I guess. However, just to check: Have you had your receiver completely powerless (cut of from mains) at anytime since your reset recently, to restore from a possible automatic shortage protection? Don't know how your receiver would react to that, so please do that again (after the above two tests, and then test them again). Greetz, A33 [I]Edit; just to be sure, ad a third test: 3. When you scan for [B]12388 Hor[/B], do you also get the programs for 11538 Vert? (like Russia Today)[/I] [/QUOTE]

Verification