Reply to thread

Message

<blockquote data-quote="Helidave" data-source="post: 750937" data-attributes="member: 352512">It's strange that your setup is having the same problem as mine!! I set all mine to signal YYou can tell if it is Astra 19 but looking at the TV channel it gies you on the 2002A feed. If it's German, its Astra 19! I use 402 as my digital channel.I would try the Scan Terieur settings before doing anything else. Notice that criteria 3 and 4 are N signal and 2 is Analogue.1&nbsp; 12207&nbsp; V&nbsp; Y&nbsp; Dig2&nbsp; 10714&nbsp; H&nbsp; N&nbsp; Ana3&nbsp; 11200&nbsp; V&nbsp; N&nbsp; Dig4&nbsp; 11307&nbsp; H&nbsp; Y&nbsp; DigThis is the April 2011 data but it is also the same as September 2010. I also notice that 2 and 3 are active channels on Astra 19 which is probably why they are N signals. If this doesn't work, try turning 2 and 3 to signal ***Don't forget to power the green wire each time you change the settings. I know it's a pain but I understand it is the only way for it to forget where it was, otherwise, it will simply return to where it thought it found Astra 28 last time, even though it is actually 19.There should be somewhere in the UK where we can get the box checked. I will contact Scan Terieur again to see as the list of agents are not necessarily able to touch the box.</blockquote>

[QUOTE="Helidave, post: 750937, member: 352512"] It's strange that your setup is having the same problem as mine!! I set all mine to signal Y You can tell if it is Astra 19 but looking at the TV channel it gies you on the 2002A feed. If it's German, its Astra 19! I use 402 as my digital channel. I would try the Scan Terieur settings before doing anything else. Notice that criteria 3 and 4 are N signal and 2 is Analogue. 1 12207 V Y Dig 2 10714 H N Ana 3 11200 V N Dig 4 11307 H Y Dig This is the April 2011 data but it is also the same as September 2010. I also notice that 2 and 3 are active channels on Astra 19 which is probably why they are N signals. If this doesn't work, try turning 2 and 3 to signal *** Don't forget to power the green wire each time you change the settings. I know it's a pain but I understand it is the only way for it to forget where it was, otherwise, it will simply return to where it thought it found Astra 28 last time, even though it is actually 19. There should be somewhere in the UK where we can get the box checked. I will contact Scan Terieur again to see as the list of agents are not necessarily able to touch the box. [/QUOTE]

Verification