Reply to thread

Message: <blockquote data-quote="Boatahome" data-source="post: 797254" data-attributes="member: 353735">Just for the few who have not followed this whole thread this is SCAN TERIEUR'S recommendation for updating to the new criteria at Dec 2011How to modify the criteria of Astra 28E Satellite and Astra 19 on the Magicsat 2002A system using the remote control only1) Switch on the system2) When the antenna starts to move press the stop key to stop the antenna3) Press the menu key to get the main menu screen4) Move the cursor up to the ‘Locked Menu’ position and press the ‘1’ key 4 times to unlock the menus 5) Press the ‘8’ key 4 times to obtain the hidden ‘Magicsat menu’. 6) Move the cursor to ‘research criteria’ and press menu to select. 7) Move the cursor to ‘Sat name’ and use the left and right cursor keys to find ‘Astra 28E’8) Move the cursor to ‘Criteria’ and select number ‘1’ check all 5 criteria against the following table and modify as necessary. Criteria Frequency Pol. Signal Mode 1 12207 MHZ V Y Digital 2 10714 MHZ H N Analog 3 11075 MHZ V N Digital 4 11307 MHZ H Y Digital 5 ••• As long as Criteria 5 has 3 dots shown in the ‘Signal’ position the other data for this criteria does not matter.9) Move the cursor to ‘Sat name’ and use the left and right cursor keys to find ‘Astra19’10)Move the cursor to ‘Criteria’ and select number ‘1’ check all 5 criteria against the following table and modify as necessary. Criteria Frequency Pol. Signal Mode 1 11494 MHZ H Y Analog 2 10964 MHZ H Y Analog 3 ***4 ***5 *** 11)Note. Any changes necessary are only performed using the left/right cursor keys.They can not be added using the number pad.12) As long as Criteria 3, 4 and 5 has 3 dots shown in the ‘Signal’ position the other data for this criteria does not matter. 13)Once all the data has been checked/modified, press the ‘memo’ key. You will get a message on the screen saying ‘Data Stored’14)Exit from all menu's15)Once you are back to the main menu move the cursor back to the ‘locked menu’position and press the ‘1’ key 4 times. This will re-lock the menu’s. 16)Close the dish down by pressing the ‘down’ key. Once this is completed you have now stored the new data.17)Restart the Magicsat and it will now search using this new data.</blockquote>

Verification