Reply to thread

Message

<blockquote data-quote="a33" data-source="post: 1119041" data-attributes="member: 332642">Here is some info on the LNB:[URL unfurl=&quot;true&quot;]https://www-gestrikeantennservice-com.translate.goog/single-cable-lnb-med-24-band/?_x_tr_sl=sv&amp;_x_tr_tl=en&amp;_x_tr_hl=nl&amp;_x_tr_pto=nui,sc[/URL]Note (translated):&quot;The fact that there are 3 identical outputs means that they are paired, so if you have selected UB01 (1210MHz) from output 1, then you must not select UB01 on any of the other 2 outputs. Incidentally, it is important not to program the same user band into 2 different receivers connected to the same microwave head, as this will cause a conflict.&quot;(From the description further on, it doesn't seem this is an LNB that switches to dCSS mode only after receiving a proper dCSS command; it starts up in dCSS?)But, as Ozumo, I am curious to the LNB settings in the receivers.Greetz,A33</blockquote>

[QUOTE="a33, post: 1119041, member: 332642"] Here is some info on the LNB: [URL unfurl="true"]https://www-gestrikeantennservice-com.translate.goog/single-cable-lnb-med-24-band/?_x_tr_sl=sv&_x_tr_tl=en&_x_tr_hl=nl&_x_tr_pto=nui,sc[/URL] Note (translated): [I]"The fact that there are 3 identical outputs means that they are paired, so if you have selected UB01 (1210MHz) from output 1, then you must not select UB01 on any of the other 2 outputs. Incidentally, it is important not to program the same user band into 2 different receivers connected to the same microwave head, as this will cause a conflict."[/I] (From the description further on, it doesn't seem this is an LNB that switches to dCSS mode only after receiving a proper dCSS command; it starts up in dCSS?) But, as Ozumo, I am curious to the LNB settings in the receivers. Greetz, A33 [/QUOTE]

Verification