Reply to thread

Message: <blockquote data-quote="jeallen01" data-source="post: 1115460" data-attributes="member: 176704">Assuming that the dish will be above the top bracket the main weight will be on that, and so the lower one will be carrying less weight and mainly stabilising the pole and the forces on that will be mainly lateral rather than vertical - therefore I'd be inclined to drill the hole(s) for that as deep as you can, and use a long a bolt as you can, and with the epoxy resin.To be clear, my approach would use the existing holes in the lower bracket, and not drilling new holes in that.</blockquote>