Reply to thread

Message

<blockquote data-quote="ralphmagno" data-source="post: 643314" data-attributes="member: 189146">hello,if you are able to connect one of the lnb outputs to the box and all works ok then the multiswitch may be the problem.i have never seen a multiswitch make a quatro become a quad .to do so the multiswitch would have to generate the 22 khz internaly to 2 lines and have a stable 14 v and 18 v.so one line would have 22 khz 18 v for hor high,one 22 khz 14 v vert high,one 14 v vert low and the last 18 v for hor.low.all the multiswitches i have seen generates one voltage and its the lnb that seperates the bands.so if you connect the wrong line to the wrong input it will not work .if you connect.then your satellite receiver&nbsp; would use the 22 khz and voltage to switch the multiswitch and it would have to block the signals going to the lnb as well.sound like a conflict to me.i think you are using the wrong lnb for the job or the multiswitch is not working right.<img src="https://www.satellites.co.uk/styles/default/xenforo/smilies/smile.png"&nbsp; class="smilie" loading="lazy" alt=":)" title="Smile&nbsp; &nbsp; :)" data-shortname=":)" />keep us informedralph</blockquote>

[QUOTE="ralphmagno, post: 643314, member: 189146"] hello, if you are able to connect one of the lnb outputs to the box and all works ok then the multiswitch may be the problem. i have never seen a multiswitch make a quatro become a quad . to do so the multiswitch would have to generate the 22 khz internaly to 2 lines and have a stable 14 v and 18 v. so one line would have 22 khz 18 v for hor high,one 22 khz 14 v vert high,one 14 v vert low and the last 18 v for hor.low. all the multiswitches i have seen generates one voltage and its the lnb that seperates the bands. so if you connect the wrong line to the wrong input it will not work . if you connect. then your satellite receiver would use the 22 khz and voltage to switch the multiswitch and it would have to block the signals going to the lnb as well. sound like a conflict to me. i think you are using the wrong lnb for the job or the multiswitch is not working right. :) keep us informed ralph [/QUOTE]

Verification