Reply to thread

Message

<blockquote data-quote="Zebethyal" data-source="post: 677003" data-attributes="member: 291746">Hi All,I am having problems with my latest dish setup:60cm standard dish, quattro LNB, Vision 5x16 multiswitch, sky+I am also feeding TV and FM via a triplexer into the common input of the multiswitch.If I connect a standard sky box to any of the outlets from the multiswitch - no problems, all channels accessible, good locked signal shown, good tone from satellite finder if connected between output and receiver.If I connect my Sky+ box, it says no signal on either of the 2 cables connected, satellite finder powers off when cable is connected.LNB settings on both boxes are the same:lo band low 9.75high band low 10.6022kHz tone onLNB power onSame cables used for both receivers, just swap the cables between tests.The Sky+ box was working fine with a minidish and quad LNB but does not want to know about the multiswitch.Cables in question are not currently connected via triplex outlet plate, although second cable would only have a standard f type connection anyway, they are being used directly with f-type connectors straight into the satellite boxes.I do have additional outlet plates, just not used them in that room yet.Any ideas? all offers of help gratefully received.</blockquote>

[QUOTE="Zebethyal, post: 677003, member: 291746"] Hi All, I am having problems with my latest dish setup: 60cm standard dish, quattro LNB, Vision 5x16 multiswitch, sky+ I am also feeding TV and FM via a triplexer into the common input of the multiswitch. If I connect a standard sky box to any of the outlets from the multiswitch - no problems, all channels accessible, good locked signal shown, good tone from satellite finder if connected between output and receiver. If I connect my Sky+ box, it says no signal on either of the 2 cables connected, satellite finder powers off when cable is connected. LNB settings on both boxes are the same: lo band low 9.75 high band low 10.60 22kHz tone on LNB power on Same cables used for both receivers, just swap the cables between tests. The Sky+ box was working fine with a minidish and quad LNB but does not want to know about the multiswitch. Cables in question are not currently connected via triplex outlet plate, although second cable would only have a standard f type connection anyway, they are being used directly with f-type connectors straight into the satellite boxes. I do have additional outlet plates, just not used them in that room yet. Any ideas? all offers of help gratefully received. [/QUOTE]

Verification