Reply to thread

Message: <blockquote data-quote="bigtee" data-source="post: 619996" data-attributes="member: 238440">bostephenMaybe I did't observe very well but looking at the pictures in your other thread, I didn't see the cable from a second LNB going into the disecq switch. In other words each LNB should use one port (total 2) of the diseqc switch. Then you must configure the receiver to correctly identify which port is being used by which LNB. Another thing to remember is that while frequency setting for C LNB will be something like 5150, that for Ku LNB will be 9750-10600. Good luck.</blockquote>