Reply to thread

Message

<blockquote data-quote="doney1" data-source="post: 785508" data-attributes="member: 383166">Yes I will add 4 more brackets , perhaps replace all ( total 8 ) and lower the pole down if there is no obstuction ( next door chiminy ). I used Al plates to level the pole not washers but it can be sorted out easily. Also I'll purchase a Inverto quad as you sugested ( better the devil !!!!).Have connected&nbsp; TM-SUPER-BOX 111 to the system to search sats. I can get Astra 28.2 and Hotbird 13.00 both S.87%, Q.97% nothing other than those 2. And nothing from West. Scan ok from East to West but no signal at all. It seems I'll have to realign/reinstall the dish when weather is ok as I mentioned earlier post.Further will I be able to connect 4 lnb connections of the quad lnb to Freesat box 2 lnb inputs and 1 to another freesat box&nbsp; and 1 to TM-5400 as all 4 leads send the power to lnb ? Or above&nbsp; setup will damage connected sets.I assume in the quad lnb there are seperate electronics for 4 output signal and they are independent units. Pleas ecorrect me if I am wrong.</blockquote>

[QUOTE="doney1, post: 785508, member: 383166"] Yes I will add 4 more brackets , perhaps replace all ( total 8 ) and lower the pole down if there is no obstuction ( next door chiminy ). I used Al plates to level the pole not washers but it can be sorted out easily. Also I'll purchase a Inverto quad as you sugested ( better the devil !!!!). Have connected TM-SUPER-BOX 111 to the system to search sats. I can get Astra 28.2 and Hotbird 13.00 both S.87%, Q.97% nothing other than those 2. And nothing from West. Scan ok from East to West but no signal at all. It seems I'll have to realign/reinstall the dish when weather is ok as I mentioned earlier post. Further will I be able to connect 4 lnb connections of the quad lnb to Freesat box 2 lnb inputs and 1 to another freesat box and 1 to TM-5400 as all 4 leads send the power to lnb ? Or above setup will damage connected sets. I assume in the quad lnb there are seperate electronics for 4 output signal and they are independent units. Pleas ecorrect me if I am wrong. [/QUOTE]

Verification