Reply to thread

Message: <blockquote data-quote="Darren Rainer" data-source="post: 306924" data-attributes="member: 244278"><p>Its just occured to me whats going on. My 28.2deg  signal on a 1.2M dish is 70 per cent with 60 percent quality. Now it should be 100%. There are roof tops in the distance and the dish is aiming over the top of these roofs at my east extreme and the same at my west extreme. So therefore by setting my motor angle to 39 degrees instead of 57degrees then the dish track does not drop off so rapidly on east and west extremes. This means the dish is looking above roofs at 39deg setting where if it is set correctly to 57deg then it would not clear the roof tops. I think that makes sense of things ? So answer is to get a longer pole on my patio mount. It's a shame I had to write a post on here in order to kick my brain cell into action.:-slaphead</p></blockquote><p></p>