My dishes collection

[AtOM13]

Never big enough
Here is my little dishes collection :
Triax 100cm and Sedea 80cm

 

[AtOM13]

Sedea 80cm Thor Hotbird Astra with IBU

 

[AtOM13]

My Channel Master 1.2m superjacked (Rimantized soon )

 

[AtOM13]

And the last "baby" ... Guess who

 

[AtOM13]

Receivers to play with :



Atlas hd200, Bein kaon 4k and Vu+Duo

 

[LeBelge]

Never big enough
Here is my little dishes collection : View attachment 157059
Triax 100cm and Sedea 80cm

Never enough LNBs on my dishes

 

[AtOM13]

Never enough LNBs on my dishes

Looooootttt of wires too

 

[LeBelge]

I have 4 Enigma2 receivers
(et je n'ai pas le temps d'attendre le moteur pour tourner du 45°E au 5°W)

 

[mike1]

Never enough LNBs on my dishes

Can you list the lnb setup such as 13 / 19 / 28 ....

 

[LeBelge]

14°W - 5°W - 0.8°W - 1.9°E - 4.8°E - 9°E - 13°E - 16°E - 19°E - 23.5°E - 28°E - 33°E - 39°E - (42°E) - 45°E - ( 52°E )

(42°E) & ( 52°E ) are not in use at the moment

 

[7mdish]

7E, 10E and 22W are lacking, so few feeds.
But maybe the dishes are too little.

 

[LeBelge]

I don't care about sport feeds

dishes 2 x 110 cm, 98 cm & 90 cm

 

[AtOM13]

 

[AtOM13]

The CM180 is a bit damaged...

Other problem, the guy clean the dish with "Kärcher" before sold it, on back, fiber is more apparent... any suggest to protect the back of the dish?

 

[purplemarina]

You could repair the dish with car body filler such as isopon p40

 

[AtOM13]

Finish to play with my CM 1.8m for this summer.
Now time to Fibotize / Rimantize my CM 1.2m .
Finally found Fibo parts from an old Fibo Phillips 90cm, and starting to fit with @RimaNTSS 's inox parts.
The quality of his work is very impressive
Fibo parts seems to be in aluminum, good quality but heavier that I think!

 

[AtOM13]

Rimantization stage 1 in progress !
Made some tests yesterday, this setup gave me 2% SQ more on 8W

 

[Chr0nik]

Quick question, how long are the arms of a 120cm Channelmaster?

 

[AtOM13]

Originals side arms 105cm, lower 74cm approximately

 

[AtOM13]

Thanks to Rimants for is c120 adapter, fits perfectly with Inverto black ultra flange!

Someone already try to remove properly the fibo feedhorn platic cap ? Is there a way to change it ?