Reply to thread

Message

<blockquote data-quote="billy" data-source="post: 7920">&gt;there are many posts in the forum that describe those CAM &gt;setings. Please use our search function to locate them &quot;EMU&quot; &gt;is short for &quot;emulator&quot;, by the way. That's the parameter &gt;that determines whether control is passed to an iserted card &gt;(EMU OFF) or wehether the Irdeto/Betacrypt emulator integral &gt;to FreeCAM firmware will be used (EMU ON). &gt;&gt;Can you please describe how you flashed this, and how (if it &gt;all) it was different from flashing any other early series &gt;of Irdeto CI CAM. Up to now I had myself failed to get the &gt;1633 CAMs flashed but had no trouble with the earlier &gt;flashable type. &gt;As many details as possible, please! &gt;&gt;2old This what I know to be correct 100%,The CAM 901633 must be REV 1.0 F/W 0.07 an must be manufactured by SCM Microsystems (who were the makers of the older CAMs 900440 etc)I flashed the CAM using ird106.exe using free_orf in windows, after flashing to SE4.7. When using free_orf ini the goodies section is different i.e blockers inplace of EMU, so I reflashed to F2-b017. The goodies section reverted to EMU. The process of flashing was easier than with my old CAM i.e. the last two bars did not go red. I am having difficulty however in getting a card to work, I have a nokia 9800s with embedded via. Would like some info on which card and hex files will work with my setup.billy</blockquote>

[QUOTE="billy, post: 7920"] >there are many posts in the forum that describe those CAM >setings. Please use our search function to locate them "EMU" >is short for "emulator", by the way. That's the parameter >that determines whether control is passed to an iserted card >(EMU OFF) or wehether the Irdeto/Betacrypt emulator integral >to FreeCAM firmware will be used (EMU ON). > >Can you please describe how you flashed this, and how (if it >all) it was different from flashing any other early series >of Irdeto CI CAM. Up to now I had myself failed to get the >1633 CAMs flashed but had no trouble with the earlier >flashable type. >As many details as possible, please! > >2old This what I know to be correct 100%, The CAM 901633 must be REV 1.0 F/W 0.07 an must be manufactured by SCM Microsystems (who were the makers of the older CAMs 900440 etc) I flashed the CAM using ird106.exe using free_orf in windows, after flashing to SE4.7. When using free_orf ini the goodies section is different i.e blockers inplace of EMU, so I reflashed to F2-b017. The goodies section reverted to EMU. The process of flashing was easier than with my old CAM i.e. the last two bars did not go red. I am having difficulty however in getting a card to work, I have a nokia 9800s with embedded via. Would like some info on which card and hex files will work with my setup. billy [/QUOTE]

Verification