need help (pc<-->stb)

[zhengzi12]

hello
i have problem to create connection between (stb<-->pc) to upgrade software and encrypted channels. that is because my receiver’s data port is not standard port, so I opened the stb’s case and see what is written with the pins (see pictures below). so i made one cable connection as "straight cable connection " and also as "cross cable connection " and tried several times, but i failed.
what i find there is extra pin with unclear written which i guess is (+3.5V) but I’m not sure.
so please tell me how can i create connection and let it works, also need loader for this to work. or standard loader to work with my reciever
here is some information about the receiver’s chipsets:
ALi M3328C B1
EON EN29LV040A-70JCCP
WINBOND w9816g6ch-6
and also here is the pictures:
_http://img292.imageshack.us/img292/7048/coshipcdvb3188c1tp7.jpg
_http://img408.imageshack.us/img408/1751/coshipcdvb3188c2sn3.jpg
_http://img408.imageshack.us/img408/3606/coshipcdvb3188c3cv2.jpg
_http://img149.imageshack.us/img149/2770/coshipcdvb3188c4ey0.jpg

 

[jshaka]

h***://rapidshare.com/files/125726035/Telesystem_F1.2_Up_Loader_e_Soft.rar

 

[bella]

h***://rapidshare.com/files/125726035/Telesystem_F1.2_Up_Loader_e_Soft.rar

Hi,

I have a rather similar problem. I have an STB with the same microchip here are the details:-

EON 29LV040A 70JCCP
W-ch
WCT. ISI ISH-8 02PMW8J

AMS 1111 TB 0812

Motherboard ID GX6101+ZL10039 V8.7B


Hardware Model 512K Flash
Hardware version GX6101 DVB-S V1.0
Software version SMART V1.0


I am trying to find the software to update it. Please help.


Thanks

 

[jshaka]

h***://rapidshare.com/files/125726035/Telesystem_F1.2_Up_Loader_e_Soft.rar

not use this, Firmware wrong!

 

[Topper]

not use this, Firmware wrong!

This is not firmware it is a loader

 

[bella]

This is not firmware it is a loader

Hi,

I take a note that this is a loader and I should not use it. But where can I get the firmware for my STB?

 

[Topper]

Hi,

I take a note that this is a loader and I should not use it. But where can I get the firmware for my STB?

Without a make and model no we are all into a strong wind

 

[bella]

Without a make and model no we are all into a strong wind

Hi,

The make is SMART F3
HARDWARE MODEL 512K Flash
Hardware Version GX6101 DVB-S V1.0
Software Version SMART V1.0

Production date APRIL16,2008

If there is not updated firmware for it may be you can provide me with the latest soft keys.


Regards

 

[Llew]

Nobody will give you any keys on this forum - read the rules!

Llew

 

[bella]

I take it there is no updated firmware for it in your forum. Is this right?

 

[Topper]

I take it there is no updated firmware for it in your forum. Is this right?

There is no illegal software on this forum we do not allow it.