Reply to thread

Message: <blockquote data-quote="deeptho" data-source="post: 1144563" data-attributes="member: 215446">Your 36.0E is now configured correctly, which explains why it works now.For 42.0E the kernel log show nothing special. I suspect a problem with your setup, such as confusing port 0 with another one.  Port 0 is the default, so try it without diseqc (after powering down)Why not meausure the voltage at various places (output of the card, input of the lnb)during scan. The voltge should switch between 13 and 18. It should be easy to see of that happens or not.</blockquote>