Reply to thread

Message

<blockquote data-quote="satesco" data-source="post: 1144719" data-attributes="member: 297935">Back to 26.0E with a neumoDVB version 1.2 test after switching to the lnb setting before the dvb cards (v.1.1). I tried scanning Amateur Radio on 10491 H,1500,4/5 at 26.0E with the lnb set to 10.5 GHz, as the documentation states. This lnb setting does not work on muxes between 10490-10499 H. The only way to lock these muxes is with lnb 9.75 GHz at LOF Low, setting the scan limits between 10470-11200 H or narrowing the search band even more.My first test was with the 5927 tuner, also recommended for these low sub-band muxes. I also had no problems locking Mux with a symbol rate of 333.I also tested the 6983 card with the same lnb configuration for Amateur Radio reception. This time I also had no problems locking some frequencies.With the 6903x card, I managed to do a normal scan of these muxes, getting a normal spectrum.The problem was only when I scanned it manually, it gave me a parameter error, i.e., instead of the 10491 H frequency, it scanned 12040 H, although the other 10490 H parameters were preserved&nbsp; (sr &amp; FEC).I would like to know if another valid setting exists for the lnb so that I can scan and lock these Amateur Radio muxes.Or even better, how is it correct to set LOF Low, freq min, freq max, etc.?</blockquote>

[QUOTE="satesco, post: 1144719, member: 297935"] Back to 26.0E with a neumoDVB version 1.2 test after switching to the lnb setting before the dvb cards (v.1.1). I tried scanning Amateur Radio on 10491 H,1500,4/5 at 26.0E with the lnb set to 10.5 GHz, as the documentation states. This lnb setting does not work on muxes between 10490-10499 H. The only way to lock these muxes is with [B]lnb 9.75 GHz[/B] at LOF Low, setting the scan limits between 10470-11200 H or narrowing the search band even more. My first test was with the 5927 tuner, also recommended for these low sub-band muxes. I also had no problems locking Mux with a symbol rate of 333. I also tested the 6983 card with the same lnb configuration for Amateur Radio reception. This time I also had no problems locking some frequencies. With the 6903x card, I managed to do a normal scan of these muxes, getting a normal spectrum. The problem was only when I scanned it manually, it gave me a parameter error, i.e., instead of the 10491 H frequency, it scanned 12040 H, although the other 10490 H parameters were preserved (sr & FEC). I would like to know if another valid setting exists for the lnb so that I can scan and lock these Amateur Radio muxes. Or even better, how is it correct to set LOF Low, freq min, freq max, etc.? [/QUOTE]

Verification