Reply to thread

Message

<blockquote data-quote="deeptho" data-source="post: 1144774" data-attributes="member: 215446">&quot;Setting the LNB to 10.5Gz&quot; is not mentioned in the documentation, which mentions setting freq_min to that value.That will only work if the card supports it. 6903x does not.The LOF value should be set to the correct one for the LNB, which is indeed probably 9.75GHz if it is a Universal LNB.The value -1 is also fine. It then picks that default.So in summary: all of this works correctly for you (except for the impossible parts)Difficult to comment without any further information.Well, it is exactly as the documentation states, with possibly one exception: the lowest and highest frequency that canbe tuned to are not only determined by the lnb but also by the card. So not all values will work. The only limit that is internallychecked is the one for the card. The other limits (for the lnb) you have to set yourself. The LOF value needs to be the correct oneas written on the LNB.</blockquote>

[QUOTE="deeptho, post: 1144774, member: 215446"] "Setting the LNB to 10.5Gz" is not mentioned in the documentation, which mentions setting freq_min to that value. That will only work if the card supports it. 6903x does not. The LOF value should be set to the correct one for the LNB, which is indeed probably 9.75GHz if it is a Universal LNB. The value -1 is also fine. It then picks that default. So in summary: all of this works correctly for you (except for the impossible parts) Difficult to comment without any further information. Well, it is exactly as the documentation states, with possibly one exception: the lowest and highest frequency that can be tuned to are not only determined by the lnb but also by the card. So not all values will work. The only limit that is internally checked is the one for the card. The other limits (for the lnb) you have to set yourself. The LOF value needs to be the correct one as written on the LNB. [/QUOTE]

Verification