New Blindscan software

[aceb]

There is some new windoze software available that offers blindscan support for the
Omicom S2 PCI rev.3 (all demod versions), Prof 7301, Prof 8000 and the TechnoTrend S2-1600. I can confirm (at least with my 7301) that it works, and very well too! Here's a link to Rick's satellite forum as it has the download links as well as some discusion on it.

_http://rickcaylor.websitetoolbox.com/post?id=5183609&trail=15

It comes with another programme called crazyscan that plots the IF range similar to a spectrum analyser, interesting to view the varying noise floor and see spikes from transponders.


[fieldset=]Moderation






This Forum does not permit the Posting of Live Links - I have disabled it for you, on this occasion[/fieldset] It wasn't, I've got a copy of the original post sent to me from the forum showing the underscore.

 

[fergyc]

Thanks, seems to be working but only picking up channels with 27500 SR

 

[aceb]

Thanks, seems to be working but only picking up channels with 27500 SR

Have you altered the minimum SR in the ini file, it's set to 20000 as a default, I guess to speed up the scan. I've lowered mine right down to 2000 and while it does take a fair bit longer to complete the scan it does find most of the transponders on each sat.

I normally use DVB Dream, not sure if it's a limitation of that or the hardware but it won't find transponders with a SR lower than 1000 when scanning a transponder list.

 

[fergyc]

; Minimal symbol rate for BlindScan in KS (1000-50000), default 1000
MinSR=1000

Mine was set to 10000 but lowered it to 1000 and still only getting 27500

 

[aceb]

Might be worth asking on Ricks forum, one of the posters is, I believe involved with the project and may be able to help.