new Bosnian package in T2MI

Status
Not open for further replies.
stephan94

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
904
Reaction score
1,428
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
11442H 17500
O Kanal
Una TV
NOVA BH
BN TV
OBN
The E2 Receivers are not able to read the programmes automatically.
Encode_1080P_78.mp4_20230127_162015.245.jpgEncode_1080P_78.mp4_20230127_162028.477.jpgEncode_1080P_78.mp4_20230127_162035.740.jpgEncode_1080P_78.mp4_20230127_162042.005.jpgEncode_1080P_78.mp4_20230127_162045.981.jpg
 
stephan94

stephan94

Specialist Contributor
Joined
Jun 30, 2008
Messages
904
Reaction score
1,428
Points
93
Age
67
My Satellite Setup
1.80 Channel master with 6 LNB KU KA C Band 1200 Laminas KU
Openbox SX6 and S3 Mini, Dr HD 15, GTCombo ; Octagon SF 4008 , TBS 6983
My Location
Bavaria
you have to put 4095 in PID of the T2MI and it works for the E2T2MI 4095.jpg4095.jpg
 
william-1

william-1

Super Moderator
Staff member
Joined
Jul 2, 2005
Messages
12,260
Reaction score
12,328
Points
113
Location
Epping Forest
My Satellite Setup
OP Gibertini 100 XP+ Inverto Black Ultra Lnb
Superior Dark Motor (160° max)
(50 east to 45 west)
Octagon SX88+Optima (A/B switch) Edision primo IP S2

Raven 88cm Mesh Dish + IBU Twin output
Stab100 H to H (120° max)
(53 east to 45 west)
Octagon SX88+ Ultra HD (A/B switch) Golden Interstar Alpha_X
My Location
Epping Forest Essex
satesco

satesco

Specialist Contributor
Joined
Aug 10, 2008
Messages
2,148
Reaction score
3,078
Points
113
My Satellite Setup
seven antennas,one toroidal with 16 lnbs,
6 satellite receivers,2 Meters,9 PC cards(tbs6983,6903,6590,6504,6522,6209,2603,6909X,6903X,6902se,skystar hd2),2 tuners usb-tbs5927 & tbs5925,Skystar HD.
Satellite reception between 100.5E-50.0W
My Location
Romania
33.1E_11442 H,17500,3/4,8PSK
No reception problems with this t2-mi in my area.
And yet it seems the signal is weak, considering that I am relatively close to the targeted area.
 

Attachments

  • 11442 H,17500,34,8psk-OBN_2023-01-27_19-25-26.png
    11442 H,17500,34,8psk-OBN_2023-01-27_19-25-26.png
    389.6 KB · Views: 41
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
I have to program this in my Dreambox DM920UHD manually, but I can't get it working.
Any help please?

What I've done:
-Scanned 11444H
-Looked with TransEdit what the T2-MI PID is (4095)
TS analyser.png
-Put Enigma2 in stop mode (init 4)
-Edit lamedb:
Code: 
transponders
014a2cb4:0190:0000
    s 11444000:17500000:0:3:330:2:0:1:2:0:0
/
end
services
0fa1:014a2cb4:0190:0000:1:0:0
11444H_plp0
p:Dasto Semtel,c:150fff,f:5
end

Added to astra.conf:
Code: 
--Dasto Semtel 33E

dastosemtel = make_t2mi_decap({
  name = "Dasto",
  input = "http://localhost:8001/1:0:1:FA1:190:0:14A2CB4:0:0:0",
  plp = 0,
  pnr = 0,
  pid = 4095,
})

make_channel({
  name = "Dasto",
  input = { "t2mi://dastosemtel", },
  output = { "http://0.0.0.0:9999/dasto0/11442plp0", },
})

Did a scan with:
Code: 
astra --analyze "t2mi://#t2mi_pid=4095&t2mi_input=http://127.0.0.1:8001/1:0:1:FA1:190:0:14A2CB4:0:0:0"
This gave as result:
Code: 
root@dm920:~# astra --analyze "t2mi://#t2mi_pid=4095&t2mi_input=http://127.0.0.1:8001/1:0:1:FA1:190:0:14A2CB4:0:0:0"
Feb 09 13:08:33: INFO: Starting Astra SM 0.2
Feb 09 13:08:34: INFO: [t2mi/analyze] L1-current: PLP 0 (Data Type 1), group 1 (*)
Feb 09 13:08:34: INFO: [t2mi/analyze] selected data PLP 0 (auto)
Feb 09 13:08:34: INFO: PAT: tsid: 400
Feb 09 13:08:34: INFO: PAT: pid: 16 NIT
Feb 09 13:08:34: INFO: PAT: pid: 4096 PMT pnr: 4001
Feb 09 13:08:34: INFO: PAT: pid: 4240 PMT pnr: 4002
Feb 09 13:08:34: INFO: PAT: pid: 4160 PMT pnr: 4003
Feb 09 13:08:34: INFO: PAT: pid: 4144 PMT pnr: 4004
Feb 09 13:08:34: INFO: PAT: pid: 4336 PMT pnr: 4005
Feb 09 13:08:34: INFO: PAT: pid: 4224 PMT pnr: 4006
Feb 09 13:08:34: INFO: PAT: pid: 4320 PMT pnr: 4007
Feb 09 13:08:34: INFO: PAT: pid: 4256 PMT pnr: 4008
Feb 09 13:08:34: INFO: PAT: pid: 4304 PMT pnr: 4012
Feb 09 13:08:34: INFO: PAT: pid: 4272 PMT pnr: 4013
Feb 09 13:08:34: INFO: PAT: pid: 4288 PMT pnr: 4014
Feb 09 13:08:34: INFO: PAT: crc32: 0x957172F7
Feb 09 13:08:34: INFO: PMT: pnr: 4004
Feb 09 13:08:34: INFO: PMT: pid: 4145 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4145 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: Stream ID: 1
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x500BF50F01656E67566964656F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x28046400283F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x060102
Feb 09 13:08:34: INFO: AUDIO: pid: 4147 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: AUDIO: Stream ID: 3
Feb 09 13:08:34: INFO: AUDIO: descriptor: 0x500DF20303737270617564696F2D31
Feb 09 13:08:34: INFO: AUDIO: descriptor: 0x060101
Feb 09 13:08:34: INFO: AUDIO: Language: srp
Feb 09 13:08:34: INFO: PMT: crc32: 0xC696EF01
Feb 09 13:08:34: INFO: PMT: pnr: 4006
Feb 09 13:08:34: INFO: PMT: pid: 4225 PCR
Feb 09 13:08:34: INFO: PMT: descriptor: 0xA30B01426F73010000034F424E
Feb 09 13:08:34: INFO: VIDEO: pid: 4225 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x28044D001E3F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x060102
Feb 09 13:08:34: INFO: AUDIO: pid: 4227 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: AUDIO: Language: Bos
Feb 09 13:08:34: INFO: PMT: crc32: 0xCD22A757
Feb 09 13:08:34: INFO: PMT: pnr: 4005
Feb 09 13:08:34: INFO: PMT: pid: 4337 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4337 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: AUDIO: pid: 4339 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: PMT: crc32: 0x6018387C
Feb 09 13:08:34: INFO: PMT: pnr: 4008
Feb 09 13:08:34: INFO: PMT: pid: 4257 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4257 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: AUDIO: pid: 4259 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: PMT: crc32: 0x71801E59
Feb 09 13:08:34: INFO: PMT: pnr: 4014
Feb 09 13:08:34: INFO: PMT: pid: 4289 PCR
Feb 09 13:08:34: INFO: PMT: Maximum bitrate: 5559
Feb 09 13:08:34: INFO: VIDEO: pid: 4289 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: Maximum bitrate: 5184
Feb 09 13:08:34: INFO: AUDIO: pid: 4291 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: AUDIO: Maximum bitrate: 375
Feb 09 13:08:34: INFO: PMT: crc32: 0x935ADF14
Feb 09 13:08:34: INFO: PMT: pnr: 4003
Feb 09 13:08:34: INFO: PMT: pid: 4161 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4161 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: Maximum bitrate: 19379
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x28046400283F
Feb 09 13:08:34: INFO: AUDIO: pid: 4163 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: AUDIO: descriptor: 0x030127
Feb 09 13:08:34: INFO: AUDIO: Maximum bitrate: 492
Feb 09 13:08:34: INFO: PMT: crc32: 0x4DE592CD
Feb 09 13:08:34: INFO: PMT: pnr: 4007
Feb 09 13:08:34: INFO: PMT: pid: 4322 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4321 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: Stream ID: 1
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x500BF50301656E67566964656F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x280464001E3F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x060102
Feb 09 13:08:34: INFO: AUDIO: pid: 4323 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: AUDIO: Stream ID: 3
Feb 09 13:08:34: INFO: AUDIO: descriptor: 0x500DF20303426F73617564696F2D31
Feb 09 13:08:34: INFO: AUDIO: descriptor: 0x060101
Feb 09 13:08:34: INFO: AUDIO: Language: Bos
Feb 09 13:08:34: INFO: PMT: crc32: 0x49DF5DB
Feb 09 13:08:34: INFO: Bitrate: 17951 Kbit/s
Feb 09 13:08:34: INFO: PMT: pnr: 4012
Feb 09 13:08:34: INFO: PMT: pid: 4305 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4305 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: AUDIO: pid: 4307 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: PMT: crc32: 0x7926471
Feb 09 13:08:34: INFO: PMT: pnr: 4002
Feb 09 13:08:34: INFO: PMT: pid: 4241 PCR
Feb 09 13:08:34: INFO: PMT: descriptor: 0xA30E01426F7301000006554E41205456
Feb 09 13:08:34: INFO: VIDEO: pid: 4241 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x28046400283F
Feb 09 13:08:34: INFO: VIDEO: descriptor: 0x060102
Feb 09 13:08:34: INFO: AUDIO: pid: 4243 type: ADTS AAC, ISO/IEC 13818-7 (0x0F)
Feb 09 13:08:34: INFO: AUDIO: Language: Bos
Feb 09 13:08:34: INFO: PMT: crc32: 0x20E57AB3
Feb 09 13:08:34: INFO: PMT: pnr: 4013
Feb 09 13:08:34: INFO: PMT: pid: 4273 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4273 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: AUDIO: pid: 4275 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: PMT: crc32: 0xDCDDC864
Feb 09 13:08:34: INFO: PMT: pnr: 4001
Feb 09 13:08:34: INFO: PMT: pid: 4097 PCR
Feb 09 13:08:34: INFO: VIDEO: pid: 4097 type: MPEG-4 AVC/H.264, ISO/IEC 14496-10 (0x1B)
Feb 09 13:08:34: INFO: AUDIO: pid: 4099 type: MPEG-1 audio, ISO/IEC 11172-3 (0x03)
Feb 09 13:08:34: INFO: PMT: crc32: 0xD615FE6
Feb 09 13:08:34: INFO: SDT: tsid: 400
Feb 09 13:08:34: INFO: SDT: sid: 4001
Feb 09 13:08:34: INFO: SDT:    Service: O Kanal
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4004
Feb 09 13:08:34: INFO: SDT:    Service: BN TV
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4006
Feb 09 13:08:34: INFO: SDT:    Service: OBN
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4014
Feb 09 13:08:34: INFO: SDT:    Service: RTV BPK
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4012
Feb 09 13:08:34: INFO: SDT:    Service: RTV Cazin
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4002
Feb 09 13:08:34: INFO: SDT:    Service: UNA TV
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4003
Feb 09 13:08:34: INFO: SDT:    Service: NOVA BH
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4005
Feb 09 13:08:34: INFO: SDT:    Service: O Music
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4007
Feb 09 13:08:34: INFO: SDT:    Service: N1
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4013
Feb 09 13:08:34: INFO: SDT:    Service: RTV USK
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: sid: 4008
Feb 09 13:08:34: INFO: SDT:    Service: TV SA
Feb 09 13:08:34: INFO: SDT:    Provider: Dasto Semtel
Feb 09 13:08:34: INFO: SDT: crc32: 0x374670BE

continued in next message, seems I may only use 1000 characters.
 
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
And made this bouquet:
Code: 
#SERVICE 1:64:1E7:0:0:0:0:0:0:0::--- Dasto Semtel T2-MI ---
#DESCRIPTION --- Dasto Semtel T2-MI ---
#SERVICE 1:0:1:FA1:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:O Kanal
#DESCRIPTION O Kanal
#SERVICE 1:0:1:FA2:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:UNA TV
#DESCRIPTION UNA TV
#SERVICE 1:0:1:FA3:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:NOVA BH
#DESCRIPTION NOVA BH
#SERVICE 1:0:1:FA4:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:BN TV
#DESCRIPTION BN TV
#SERVICE 1:0:1:FA5:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:O Music
#DESCRIPTION O Music
#SERVICE 1:0:1:FA6:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:OBN
#DESCRIPTION OBN
#SERVICE 1:0:1:FA7:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:N1
#DESCRIPTION N1
#SERVICE 1:0:1:FA8:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:TV SA
#DESCRIPTION TV SA
#SERVICE 1:0:1:FAC:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:RTV Cazin
#DESCRIPTION RTV Cazin
#SERVICE 1:0:1:FAD:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:TV USK
#DESCRIPTION TV USK
#SERVICE 1:0:1:FAE:190:7FE:14a0000:0:0:0:http%3a//0.0.0.0%3a9999/dasto0/11444plp0:RTV BPK
#DESCRIPTION RTV BPK

Note: I took the ONID and TID from Lyngsat, I'd like to know how I can find these parameters myself. Or does it not matter what I set as ONID and TID in the bouquet? (As long as the SID is right).

-Started Enigma2 again with init 3.

When I tune into one of the channels no picture and the message "No data on transponder! (Timeout reading PAT)"
 
C

cirio70

Member
Joined
Mar 13, 2022
Messages
171
Reaction score
313
Points
63
Age
54
My Satellite Setup
Laminas 180 - Fracarro UX-TW-LTE(PLL) - C Band - TBS6903 - TBS5922H - Octagon SF 8008
My Location
Lombardy - Italy
From my point of view you did all correct:
I tuned the channels with my octagon and ONID & TID are correct,
i checked your script but i didn't see any mistake.

This, in example, is the service reference for "O Kanal" as stored in my octagon and you'll see is the same as yours:
O Kanal: 1:0:19:FA1:190:7FE:14A0000:0:0:0

The only difference is the service type (in my case 19) meaning "19h = MPEG / H264 (HD,FHD)" but i don't think this will make a difference
 
Last edited:
EnoSat

EnoSat

Specialist Contributor
Joined
May 29, 2004
Messages
822
Reaction score
768
Points
93
Age
53
Website
enosat.euweb.cz
My Satellite Setup
TBS-5925/5220/5520SE , Dr.HD , Dreambox , Edision , Mutant , Octagon
My Location
Slovakia
Lexzie said:
Note: I took the ONID and TID from Lyngsat, I'd like to know how I can find these parameters myself. Or does it not matter what I set as ONID and TID in the bouquet? (As long as the SID is right).

When I tune into one of the channels no picture and the message "No data on transponder! (Timeout reading PAT)"
Click to expand...
1, http://ip_dm920:9999/dasto0/11442plp0 - open in TransEdit, show all parameters (SID,TID,NID,ONID)
2, try use c:000fff if use OE2.5 (maybe problem OE2.5 if DATA set as c:15)
3, i think that using 1 or 19 in userbouquet will not change anything
 
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
EnoSat said:
1, http://ip_dm920:9999/dasto0/11442plp0 - open in TransEdit, show all parameters (SID,TID,NID,ONID)
2, try use c:000fff if use OE2.5 (maybe problem OE2.5 if DATA set as c:15)
3, i think that using 1 or 19 in userbouquet will not change anything
Click to expand...

1. I add that as a TS stream? When pressing Analyse or Scan Selected I get a Tuning Error.
Laptop is connected to the same switch with IP-address 172.25.1.100
1675976061044.png

2. I have OpenPLi 8.3, that should not be OE2.5.
Other transponders like those on 4.8E also have c:15 and they work.

3. I think so too.


For the record: I made an error in the post above, astra.conf in my receiver actually is:
--Dasto Semtel 33E

dastosemtel = make_t2mi_decap({
name = "Dasto",
input = "http://localhost:8001/1:0:1:FA1:190:0:14A2CB4:0:0:0",
plp = 0,
pnr = 0,
pid = 4095,
})

make_channel({
name = "Dasto",
input = { "t2mi://dastosemtel", },
output = { "http://0.0.0.0:9999/dasto0/11444plp0", },
})
 

Attachments

  • 1675974698558.png
    1675974698558.png
    32.9 KB · Views: 35
EnoSat

EnoSat

Specialist Contributor
Joined
May 29, 2004
Messages
822
Reaction score
768
Points
93
Age
53
Website
enosat.euweb.cz
My Satellite Setup
TBS-5925/5220/5520SE , Dr.HD , Dreambox , Edision , Mutant , Octagon
My Location
Slovakia
for me work ok (you use TransEdit together with DVBViewer installation or just separately without installation ? - without installation, it does not have the necessary libraries for processing streams)
capture_014_09022023_222756.png33E_11443H.pngcapture_016_09022023_230305.png
Code: 
<transponder frequency="11443000" symbol_rate="17500000" polarization="0" fec_inner="3" system="1" modulation="2" t2mi_plp_id="0" t2mi_pid="4095"/>
Code: 
014a2cb3:0190:0000
    s 11443000:17500000:0:3:330:2:0:1:2:0:2:-1:0:1:0:4095
/

0fa1:014a2cb3:0190:0000:1:0:0
T2MI 11443H PLP0 SID 0xfa1
p:T2-MI,c:031fff,c:150fff,f:5
Code: 
-- DASTO 33E

f11443 = make_t2mi_decap({
        name = "11443H T2MI",
        input = "http://localhost:8001/1:0:1:FA1:190:0:14A2CB3:0:0:0:",
        plp = 0,
        pnr = 0,
        pid = 4095,
})

make_channel({
        name = "11443plp0", input = { "t2mi://f11443", },
        output = { "http://0.0.0.0:9999/dasto/11443plp0", },
})
Code: 
#NAME Dasto Semtel T2-MI (33.1E)
#SERVICE 1:64:16:0:0:0:0:0:0:0::---------- Dasto Semtel T2-MI (33.1 E) ----------
#DESCRIPTION ---------- Dasto T2-MI (33E) ----------
#SERVICE 1:64:0:0:0:0:0:0:0:0::NID 0D01
#DESCRIPTION NID 3329
#SERVICE 1:0:1:FA1:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:O Kanal
#SERVICE 1:0:19:FA2:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:UNA TV (test 19 from SDT)
#SERVICE 1:0:1B:FA3:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:NOVA BH (test 1B from PMT)
#SERVICE 1:0:1:FA4:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:BN TV
#SERVICE 1:0:1:FA5:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:O Music
#SERVICE 1:0:1:FA6:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:OBN
#SERVICE 1:0:1:FA7:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:N1
#SERVICE 1:0:1:FA8:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:TV SA
#SERVICE 1:0:1:FAC:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV Cazin
#SERVICE 1:0:1:FAD:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV USK
#SERVICE 1:0:1:FAE:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV BPK
1_0_1_FA1_190_7FE_0_0_0_0_20230209234304.jpg
 
Last edited:
F

Fidu7

New Member
Joined
Mar 21, 2015
Messages
8
Reaction score
7
Points
3
Age
47
My Satellite Setup
Gibertini 125
My Location
Luzern
Hi

With this configuration it works with DM920

Greetings

Fidu
 

Attachments

  • screenshot 4.jpg
    screenshot 4.jpg
    160 KB · Views: 41
  • Dasto.png
    Dasto.png
    425.2 KB · Views: 50
  • screenshot 1.jpg
    screenshot 1.jpg
    184.4 KB · Views: 39
  • screenshot 2.jpg
    screenshot 2.jpg
    177.6 KB · Views: 29
  • screenshot 3.jpg
    screenshot 3.jpg
    120.6 KB · Views: 32
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
EnoSat said:
for me work ok (you use TransEdit together with DVBViewer installation or just separately without installation ? - without installation, it does not have the necessary libraries for processing streams)
View attachment 147465View attachment 147464View attachment 147463
Code: 
<transponder frequency="11443000" symbol_rate="17500000" polarization="0" fec_inner="3" system="1" modulation="2" t2mi_plp_id="0" t2mi_pid="4095"/>
Code: 
014a2cb3:0190:0000
    s 11443000:17500000:0:3:330:2:0:1:2:0:2:-1:0:1:0:4095
/

0fa1:014a2cb3:0190:0000:1:0:0
T2MI 11443H PLP0 SID 0xfa1
p:T2-MI,c:031fff,c:150fff,f:5
Code: 
-- DASTO 33E

f11443 = make_t2mi_decap({
        name = "11443H T2MI",
        input = "http://localhost:8001/1:0:1:FA1:190:0:14A2CB3:0:0:0:",
        plp = 0,
        pnr = 0,
        pid = 4095,
})

make_channel({
        name = "11443plp0", input = { "t2mi://f11443", },
        output = { "http://0.0.0.0:9999/dasto/11443plp0", },
})
Code: 
#NAME Dasto Semtel T2-MI (33.1E)
#SERVICE 1:64:16:0:0:0:0:0:0:0::---------- Dasto Semtel T2-MI (33.1 E) ----------
#DESCRIPTION ---------- Dasto T2-MI (33E) ----------
#SERVICE 1:64:0:0:0:0:0:0:0:0::NID 0D01
#DESCRIPTION NID 3329
#SERVICE 1:0:1:FA1:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:O Kanal
#SERVICE 1:0:19:FA2:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:UNA TV (test 19 from SDT)
#SERVICE 1:0:1B:FA3:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:NOVA BH (test 1B from PMT)
#SERVICE 1:0:1:FA4:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:BN TV
#SERVICE 1:0:1:FA5:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:O Music
#SERVICE 1:0:1:FA6:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:OBN
#SERVICE 1:0:1:FA7:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:N1
#SERVICE 1:0:1:FA8:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:TV SA
#SERVICE 1:0:1:FAC:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV Cazin
#SERVICE 1:0:1:FAD:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV USK
#SERVICE 1:0:1:FAE:190:7FE:0:0:0:0:http%3a//0.0.0.0%3a9999/dasto/11443plp0:RTV BPK
View attachment 147471
Click to expand...
No I don't have DVBViewer, where can I download that?

Can you explain how you got to this?
Code: 
11443000:17500000:0:3:330:2:0:1:2:0:2:-1:0:1:0:4095
It is totally different than the value I had after a scan.

I literally copy-pasted everything but still not working.
Mist be differences in hardware+image?
 

Attachments

  • t2mi.zip
    211.6 KB · Views: 18
EnoSat

EnoSat

Specialist Contributor
Joined
May 29, 2004
Messages
822
Reaction score
768
Points
93
Age
53
Website
enosat.euweb.cz
My Satellite Setup
TBS-5925/5220/5520SE , Dr.HD , Dreambox , Edision , Mutant , Octagon
My Location
Slovakia
1, DVB viewer home
2, e2 automaticaly created from satellites.xml (or manual scan)
Code: 
frequency:symbolrate:polarisation:FEC:position:inversion:flags:system:modulation:roll_off:pilot:id_stream:pls_code:pls_mode
Code: 
001a0000:07d2:0002
s 12303000:30000000:1:4:282:2:0:1:1:0:2:30:0:1:0:4096
----------------------------------------------------------
namespace - XXXXxxxx /XXXX-position , xxxx-frequency
transponder_stream_id - TID
original_network_id - NID
mode - s-Satellite , t-Terestrial , c-Cable
frequency - kHz
symbol_rate -
polarization - 0-Horizontal, 1-Vertical, 2-Left, 3-Right
fec_inner - FEC - 0-Auto, 1-1/2, 2-2/3, 3-3/4, 4-5/6, 5-7/8, 6-, 7-, 8-, 9-9/10
orbital_position - + = East , - = West
inversion - 0-Off, 1-On, 2-Auto
flags
system - 0-DVB-S, 1-DVB-S2, 2-None(crash e2)
modulation - 0-Auto, 1-QPSK, 2-8PSK, 3-QAM16, 4-16APSK, 5-32APSK, 6-None(crash e2)
roll_off - 0-0.35, 1-0.25, 2-0,20, 3-Auto, 4-None
pilot - 0-Off, 1-On, 2-Auto, 3-None
is_id - Multistream number (max.255)
pls_code - Psychical Layer Stream number (max.262141)
pls_mode - 0-Gold, 1-Gold, 2-Combo, 3-unknown
t2mi_plp_id - T2-MI number
t2mi_pid - T2-MI pid

0fa1:011a0000:07d2:0002:25:0
Sky Sports 1 HD
p:BSkyB,c:050001
-------------------
service_id - SID
namespace - XXXXxxxx /XXXX - position , xxxx - frequency/
transport_stream_id - TID
original_network_id - NID
service_type -
flags/ATSC_source_id // source_id 0 = not use
name

3, astra analyse still show correct ?
received stream
Code: 
astra --analyze http://localhost:8001/1:0:1:FA1:190:0:14A2CB3:0:0:0:
de-capsuled T2-MI stream
Code: 
astra --analyze http://localhost:9999/dasto/11443plp0

4, try open in VLC http://172.25.1.4:9999/dasto/11443plp0

5, after editing astra.conf you can get more information about the activity to the console
Code: 
log.set({ stdout = true, debug = true, syslog = "astra", })
 
Last edited:
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
1. I downloaded the demo version, I think that will do.
Using TransEdit + DVB Viewer is not as straightforward for me as it is for you I guess. I still get Tune error.
How do I use them together?

2. This makes it very clear! Thanks for the info.

3. With that I get this:
1676236619690.png

4. But VLC says:
1676236802347.png

5. What's this? Where/with what do I use that?
 
Lexzie

Lexzie

Member
Joined
Feb 14, 2010
Messages
302
Reaction score
117
Points
43
Age
54
My Satellite Setup
Xtrend ET10000 DVB-C, DVB-S2, and IPTV
Dreambox DM920 DVB-C/DVB-S2X/DVB-T2
TBS 5925 USB-tuner
80 cm fixed dish (28.2E/23.5E/19.2E)
180cm Channel Master offset dish with polarmount (39E-34.5W, Ku-band)
My Location
The Netherlands
Sorry, I thought they were both in the same screenshot.
Seems to be twice the same analyse.

This is the output, so astra-sn does not do his job? (Config below)

1676315862021.png


Code: 
-- DASTO 33E

f11443 = make_t2mi_decap({
        name = "11443H T2MI",
        input = "http://localhost:8001/1:0:1:FA1:190:0:14A2CB3:0:0:0:",
        plp = 0,
        pnr = 0,
        pid = 4095,
})

make_channel({
        name = "11443plp0", input = { "t2mi://f11443", },
        output = { "http://0.0.0.0:9999/dasto/11443plp0", },
})

EnoSat said:
5, after editing astra.conf you can get more information about the activity to the console
Code: 
log.set({ stdout = true, debug = true, syslog = "astra", })
Click to expand...
I see now this on top of astra.conf:

Code: 
-- Astra Slonik Mod

log.set({ stdout = false, debug = false, syslog = "astra", })
 
Last edited:
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
36,009
Reaction score
8,720
Points
113
Age
60
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
The GTMedia Combo catches it on the spare 80 Orbital (SW London), taking time to process though since it runs through all other T2MI satellite searches.
 

Attachments

  • 20230213_201333[1].jpg
    20230213_201333[1].jpg
    640.6 KB · Views: 23
D

deeptho

Specialist Contributor
Joined
Apr 7, 2006
Messages
766
Reaction score
465
Points
63
Age
57
My Satellite Setup
Wavefrontier T90, Laminas 120cm, 2 other dishes; tbs 5927, tbs6904, tbs6909x, tbs6903x, tbs5990, tbs6981,tbs5927
My Location
Europe
neumoDVB can decode this "out of the box":

tvsa.png



positioner.png
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
36,009
Reaction score
8,720
Points
113
Age
60
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Et voila !
20230213_204805[2].jpg
 
D

deeptho

Specialist Contributor
Joined
Apr 7, 2006
Messages
766
Reaction score
465
Points
63
Age
57
My Satellite Setup
Wavefrontier T90, Laminas 120cm, 2 other dishes; tbs 5927, tbs6904, tbs6909x, tbs6903x, tbs5990, tbs6981,tbs5927
My Location
Europe
And here it decodes 12 services on this mux, all at once.

all.png
 
Status
Not open for further replies.
Top