Reply to thread

Message: <blockquote data-quote="Archive4" data-source="post: 968927">This is what I recorded[ATTACH=full]92590[/ATTACH] I then tested the measurements to the laser dot with the pole removed,total length A to dish via B 1310Top if dish to dot  1025 , bottom of dish to dot 940 . Measurements along curve of dish face.[ATTACH=full]92591[/ATTACH] This means my lnb does not look directly at the centre of the dish , just about 40 mm below.I inverted the laser to get the beam at centre lnb height and wedged a piece of rubber under the front of the laser to make it centre of dish 980 from bottom.Re-checked A - B now 1135</blockquote>